Rank: Advanced Member
Groups: Registered
Joined: 7/31/2016(UTC) Posts: 69   Thanks: 12 times
Was thanked: 2 time(s) in 2 post(s)
|
Whether vMix supports this card Blackmagic DeckLink Duo 2? I see a set of written to support the DeckLink Quad 2 or give support and DeckLink Quad second
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 10/28/2015(UTC)
Posts: 183
Thanks: 7 times
Was thanked: 15 time(s) in 14 post(s)
|
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 10/18/2015(UTC)
Posts: 185
Location: Newcastle NSW Australia
Thanks: 2 times
Was thanked: 44 time(s) in 33 post(s)
|
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 7/31/2016(UTC) Posts: 69 Thanks: 12 times
Was thanked: 2 time(s) in 2 post(s)
|
Tnx. That what I need to know.
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 8/15/2015(UTC)
Posts: 8
Location: Mobile, AL USA
|
Just to clarify, using the Decklink Duo 2, you were able to have 5 simultaneous inputs in Vmix? I ask because we got burned when we bought the BM Decklink 4k Pro.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 10/18/2015(UTC)
Posts: 185
Location: Newcastle NSW Australia
Thanks: 2 times
Was thanked: 44 time(s) in 33 post(s)
|
Sorry I am mistaken, we used the Decklink Quad 2 which gave us 8 simultaneous inputs
The Decklink Duo 2 is only 4 inputs
The 5th connector on the Duo 2 is for a reference source and is not a video input
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 3/7/2012(UTC) Posts: 2,637 Location: Canada Thanks: 33 times
Was thanked: 506 time(s) in 475 post(s)
|
@ MCPSStv Can you elaborate on how you got burned with the BM Decklink 4K Pro? And also be aware the original Decklink Duo (which is still available from B&H) is only 2 Input 2 Output, you'll want to be sure you get the new Deckling Duo 2 for 4 I/O options (the same goes for the Quad and the new Quad 2). Ice
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 5/13/2016(UTC)
Posts: 1
Location: Marietta, GA
|
I plan to get the Blackmagic Design DeckLink Duo 2 for use with vMix. Will this allow simultaneously using 3 camera inputs and one output to feed the projector and Monitors?
The inputs will include PTZ cameras and maybe an NDI PC capture.
I will use an 8 line Mini Converter SDI Distribution to feed the monitors via SDI, then to SDI TO HDMI Mini Converters.
Thanks, Keith
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/3/2016(UTC)
Posts: 10
Thanks: 6 times
|
@Keith32
I just received my DeckLink Duo 2 and tested it with 3 camera inputs via 3 BMD Micro Converter (HDMI 2 SDI) and run well with no issue (no real production only testing). For low latency and better performance, I'm planning to get HDMI distributor, hook it to the HDMI on the graphics card and use two Micro Converters (HDMI2SDI and SDI2HDMI) to feed Projectors/Monitors and for external recording. Using the capture card as an output will increase the latency.
The only problem I got is when trying to send HDMI signal from other PC to the Micro Converter then to the DeckLink Duo 2. The Input is flickering not only in vMix but also in BMD Media Express. Don't know where the problem is: the card or the converter or the other PC.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 5/24/2015(UTC)
Posts: 370
Location: Netherlands
Thanks: 16 times
Was thanked: 81 time(s) in 72 post(s)
|
It can be your cabling. The duo and quad 2 are quite picky when it comes to getting a 1080P 50/60 signal input.
When you lower the frame rate on the other system to 25/30 the problem will be gone most of the time.
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The vMix Forums uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
