logo

Live Production Software Forums


Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
ckvideo  
#1 Posted : Friday, October 28, 2022 12:01:30 AM(UTC)
ckvideo

Rank: Newbie

Groups: Registered
Joined: 3/21/2022(UTC)
Posts: 2
Germany

Hi all,

using vMix 4K 25.0.0.34 x64 we succesfully control our Sony PTZ camera from the software.

However, with a Lumens VCA 50 P (without NDI activated, video coming in on SDI) PTZ control does not work.
Network is ok, control via browser is fine.
Using a Roland hardware video mixer PTZ control works.

Doublecheck with another vMix system also fails.

In vMix, I can connect to the PTZ, but not control the device. Wireshark with a Visca dissector gives an "Unknown command error".

Can somebody confirm this or has a solution/idea?

The vMix website lists the Lumens VCA 50 as compatible.

Thanks,

Christian
Mano Bakker  
#2 Posted : Friday, December 23, 2022 10:10:52 AM(UTC)
Mano Bakker

Rank: Newbie

Groups: Registered
Joined: 8/26/2020(UTC)
Posts: 4
Netherlands
Location: Velsen / The Netherlands

Thanks: 1 times
Hi Christian,

Is your problem solved already?

On the bottum side of the Lumens ptz there is a Camera Address Selectors. That has to be on number 1.
And just to be sure, update the firmware to 213 ;-)

Greetings Mano
ckvideo  
#3 Posted : Friday, January 20, 2023 7:51:17 AM(UTC)
ckvideo

Rank: Newbie

Groups: Registered
Joined: 3/21/2022(UTC)
Posts: 2
Germany

Hi Mano,
thank you for the hint. I did not know that the cam uses an ID system. You might be right, the person renting it to us confirmed the ID setting, so I have to check this out.

Best regards,

Christian
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.