logo

Live Production Software Forums


Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Brian E. Conklin  
#1 Posted : Monday, June 19, 2017 11:59:56 AM(UTC)
Brian E. Conklin

Rank: Newbie

Groups: Registered
Joined: 6/19/2017(UTC)
Posts: 6
Man
Location: Richland, WA, USA

Thanks: 2 times
I have a virtual set we purchased from Virtual Setworks. I adjusted the zoom and Y position for a custom level but I cannot save it. Each time I load the set I must reset these values. I tried manually editing the XML file for the set, but it does not stay after re-loading vMix. I read the online tutorial that says to make the changes and use the "export" button to save the changes, but there is no "export" button.

How do I edit the positioning of the virtual set and save it?
Brian E. Conklin  
#2 Posted : Monday, June 19, 2017 12:17:57 PM(UTC)
Brian E. Conklin

Rank: Newbie

Groups: Registered
Joined: 6/19/2017(UTC)
Posts: 6
Man
Location: Richland, WA, USA

Thanks: 2 times
So I figured it out.
I found the "export" button under setup on the Virtual Set input next to the camera button. I also figured out that after editing the XML file for my custom zoom and position, I needed to reload the virtual set for the changes to take effect.
DFNB  
#3 Posted : Friday, July 9, 2021 6:18:46 PM(UTC)
DFNB

Rank: Newbie

Groups: Registered
Joined: 7/9/2021(UTC)
Posts: 5
Malaysia
Location: Kelantan

Originally Posted by: Brian E. Conklin Go to Quoted Post
So I figured it out.
I found the "export" button under setup on the Virtual Set input next to the camera button. I also figured out that after editing the XML file for my custom zoom and position, I needed to reload the virtual set for the changes to take effect.


So the config file or xml file need to be edited manually?
doggy  
#4 Posted : Friday, July 9, 2021 6:49:08 PM(UTC)
doggy

Rank: Advanced Member

Groups: Registered
Joined: 12/27/2012(UTC)
Posts: 5,057
Belgium
Location: Belgium

Thanks: 283 times
Was thanked: 916 time(s) in 755 post(s)
Originally Posted by: DFNB Go to Quoted Post
Originally Posted by: Brian E. Conklin Go to Quoted Post
So I figured it out.
I found the "export" button under setup on the Virtual Set input next to the camera button. I also figured out that after editing the XML file for my custom zoom and position, I needed to reload the virtual set for the changes to take effect.


So the config file or xml file need to be edited manually?


https://forums.vmix.com/...ve-virtual-set#post94686
Marciordj  
#5 Posted : Friday, September 9, 2022 4:15:06 AM(UTC)
Marciordj

Rank: Newbie

Groups: Registered
Joined: 7/6/2022(UTC)
Posts: 1
Brazil
Location: Curitiba

tenho um cenário que comprei do 3dvirtualset.com mas na especificação diz assim,
Atenção: Antes disso você precisa desligar a "Orientação automática" da câmera, o vídeo final deve ser composição horizontal.
No sistema virtual (vMix; Tricaster), o sinal âncora ajustará automaticamente a orientação pelo Mapa UV.

no meu caso a pessoa ficou de lado no cenário a sombra também, alguém poderia me ajudar ?
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.