Hi!
I want to show you the awards streaming. You can see at
The setup:

Video Mixer:
ATEM (working at 1080i50)

Cameras:
3 SONY HXR-MC1500P
1 Panasonic AF100

Streaming:
PC with vMix and graphics streaming at 1080p25 4500kbps and recording same but 6MB
Backup PC

Intercom
4 handys Motorola MR350 for producers

Audio:
Trialcom MXH-601 (http://trialcom.com.ar/producto/mxh-601g-consola-6-canales-celular/) throught line in.

The first 50 minutes the audio comes from our setup, but after that, the audio comes from audio mixer of the event.

This was a issue because i cannot find a proper level, and i dont know how to improve audio quality. You can see the issue at 49:30.

Suggestions will be great!
Regards.

https://drive.google.com...KLC-7-hKYX25zSGtKdjRSMU0
https://drive.google.com...KLC-7-hKYT21CUGZkTHg4NFE
https://drive.google.com...KLC-7-hKYZzdHMURreGx6MFE
https://drive.google.com...KLC-7-hKYWXhMcXJ0a3RMQ2s
https://drive.google.com...KLC-7-hKYTThYR3k1UUotTW8
https://drive.google.com...KLC-7-hKYRFZsLXY4V1pqeDQ

@ guztavo

Sounds like a possible impedance mismatch or over modulation situation, but definitely distortion as a result of line output overpowering the line input.
I assume everything sounded fine at the venue, just your Recording/Streaming of it has the issue???
What does the external mixer line out normally feed to, because it is obviously overpowering your vMix audio line in?
(BTW, I loved your graphics!)


Ice

@Tom:
Thanks for answering!
I think the problem was my audio mixer that cannot handle correctly the line input. I found a constant noise (like a blown) when activating the audio input, even without any sound.
Thanks!!

@Ice:
Thanks for answering!
I made a BIG mistake in this event: the control room of the event was installed in the same place (inside the lounge), so when i wanted to listen with headphones, the audio in the lounge was very high and didnt let me listen my headphones, so i was leveling audio looking at the volume leds.
So in the venue was the same issue, but i cant fix it with levels faders.
I always use the external mixer to mix microphones and send them throught line in input of onboard audio card. Always i find noise (like a blown), but wasnt as bad as in this show. The levels in the lounge at the speakers were fine.
About graphics, videohive.net was the first intro (look for "red carpet"). The awards graphics was made by customer, and are very nice!
Thanks!!

@Siroki:
Thanks for answering!
As you said. I found ATEM very nice. The only disadvantage is that you need to fit all inputs at the same resolution.
vMix worked fine with graphics. All the event was at 30/50% CPU usage recording and streaming.

Thanks to all for the advices!

Thanks Digitalson for your answer.
I think the audio that i recived was mixed different than what i listened on the event (it's possible that line output has separate mixing options or levels than main mix?). By the way, the mixer that the other company used was a digital one that was handled over a tablet... Amazing (at least for me).

About graphics, the ones with Renault logo was provided by the customer. The other was this one: https://videohive.net/it...carpet/8163827?s_rank=1.

In videohive.net you can find a lot of graphics, professional quality.

One more questions: wich scenario do you think i should have for this kind of events?
Because i think it's a good idea having two mixes, but how do i get that? Double microphones, and all things x2?
Thank you!