Rank: Advanced Member
Groups: Registered
Joined: 12/16/2018(UTC) Posts: 67 Location: Newfoundland & Labrador Thanks: 1 times Was thanked: 6 time(s) in 4 post(s)
|
Hi Everyone, I have 2, HP Z640 workstations, one at church one at home. Due to other issues at church I have replaced the UMC404HD with an analog mixer connected to the PC via analog line in, which has solved the issues. I brought the UMC404HD home to do some testing. Here's what I found: Audio Source
20 Min Recording 1khz tone generator connected directly to UMC404HD input #1. Results
AUDACITY = 20 minutes no dropouts or other issues. vMix = Dropouts occur at the following times. 50sec 2m47s 4m43s 6m44s 8m44s 10m40s 12m39s 14m37s 16m36s 18m38s I have attached a photo of the drop out. Each one is identical. As you can see they do not last very long, however because they are so short, they sound like pops in the audio. Audio stays in sync with video for the duration of the recording. I have tried various power management and USB setting recommendations, but as it's recording without issue in Audacity, it seems to be a vMix only problem. Also, it is not just on the recorded file, but also during live streams as well so I assume the recording file format is not suspect. Any help would be great. Thanks tone.jpg (43kb) downloaded 0 time(s).
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The vMix Forums uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close