vMix Forums
»
General
»
vMix Call
»
VMix Call Scratchiness with 1 isolated input
Rank: Newbie
Groups: Registered
Joined: 12/23/2020(UTC) Posts: 4 
|
Hello,
I've been testing some new gear setups:
Sony Z90
Elgato Cam Link 4k
Rode Wireless Go into Z90
Testing going into a retina MacBook Pro (LED Bar) using Firefox browser.
After about 20 seconds of clean audio, the audio quality drops and there is notable scratchiness on the end of speech.
I've been combing through the support forum, and have thrown several different bandwidths and return bandwidths at it, gone peer-to-peer, but the audio degrades over time with every troubleshooting method.
What's more is, when using the onboard mic for audio (and the z90 video), the issue does not persist. When using a Sony AX53's onboard mic, the issue does not arise.
At the camera level on the z90, the audio is clean. So something is happening specifically with the Rode Wireless Go + Z90 that we can't figure out.
Open to any troubleshooting ideas.
Thanks,
Marshall
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 4/23/2017(UTC) Posts: 1,230  Location: Germany Thanks: 3 times
Was thanked: 168 time(s) in 150 post(s)
|
I would try to isolate the issue.
Z90 build in mic = no issue
Z90 + Rode = issue
AX53 build in mic = no issue
AX53 + Rode = ??
See if the problem follows with some changes you make or if it doesn't. With that you know where the issue comes from. Then look into more detail what might be causing it.
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 12/23/2020(UTC) Posts: 4
|
Originally Posted by: mavik  I would try to isolate the issue.
Z90 build in mic = no issue
Z90 + Rode = issue
AX53 build in mic = no issue
AX53 + Rode = ??
See if the problem follows with some changes you make or if it doesn't. With that you know where the issue comes from. Then look into more detail what might be causing it. Right--Component Isolation at its finest! Here's what I've done so far: Firefox Macbook Pro Z90 Rode Wireless GO Vmix Call Replacing vmix call with Zoom removes the problem (with all other conditions the same). Replacing Camlink audio with Onboard Mic audio removes the problem (I believe from observation) Replacing Macbook Pro with a Macbook AIR (seriously?) or different MacBook Pro removes the problem. It appears to be something happening in the VMix call send machine.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 4/23/2017(UTC) Posts: 1,230 Location: Germany Thanks: 3 times
Was thanked: 168 time(s) in 150 post(s)
|
Have you tried advanced.vmixcall.com
It gives you more settings to play with.
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 12/23/2020(UTC) Posts: 4
|
To update:
I believe I have isolated the problem to the Macbook Pro (2019, 2 thunderbolt 3 ports); all other machines I've used do not have the problem. VMix Support says from the logs it's not VMix Call. So something about this machine...
2019 Macbook Pro
10.15.7 Catalina
1.4 GHz Quad Core i5
16 GB ram
Intel Graphics UHD 645 1538MB
...that is causing the audio scratchiness. It doesn't happen over any other machine.
|
|
|
|
|
|
vMix Forums
»
General
»
vMix Call
»
VMix Call Scratchiness with 1 isolated input
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The vMix Forums uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
