Rank: Advanced Member
Groups: Registered
Joined: 2/18/2019(UTC) Posts: 54  Thanks: 5 times
Was thanked: 2 time(s) in 2 post(s)
|
Hi from germany!
I am searching for a PC Hardware solution working with my Blackmagic Design ATEM Studio. The idea is to send some video signal over the HDMI OUT to a HDMI Input of the switcher, and receive the "Master" Video signal over a HD-SDI Input of the PC-Card. Then Vmix would have the job to stream and record.
The DeckLink HD Extreme 3D+ could be a solution, but does this card work with Vmix?
Thx
Burie
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 5/13/2014(UTC) Posts: 518   Location: Manchester, UK Thanks: 2 times
Was thanked: 183 time(s) in 130 post(s)
|
Originally Posted by: burie  The DeckLink HD Extreme 3D+ could be a solution, but does this card work with Vmix? Yes, it works with vMix (shown below with v22, under Windows 10).  BMDExtreme.PNG (13kb) downloaded 3 time(s).
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 2/18/2019(UTC) Posts: 54 Thanks: 5 times
Was thanked: 2 time(s) in 2 post(s)
|
Originally Posted by: zenvideo Originally Posted by: burie The DeckLink HD Extreme 3D+ could be a solution, but does this card work with Vmix? Yes, it works with vMix (shown below with v22, under Windows 10). well, I will trust you :-) have bought one out of a Apple Computer. My personal problem is... I bought a card some time ago (not from BlackmagicDesign) and this card does not work with either Vmix or other software (Nagasoft et al.). That was a total flop. I hope this time it works better
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 5/13/2014(UTC) Posts: 518 Location: Manchester, UK Thanks: 2 times
Was thanked: 183 time(s) in 130 post(s)
|
The card I used for the screen grab above is one which I bought on ebay, and I think the owner said it had been in a Mac-based editing system, but I own a few other Blackmagic I/O devices so I already knew that the "Blackmagic Desktop Video" drivers work with vMix and quite a lot of other software.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 2/18/2019(UTC) Posts: 54 Thanks: 5 times
Was thanked: 2 time(s) in 2 post(s)
|
Originally Posted by: zenvideo The card I used for the screen grab above is one which I bought on ebay, and I think the owner said it had been in a Mac-based editing system, but I own a few other Blackmagic I/O devices so I already knew that the "Blackmagic Desktop Video" drivers work with vMix and quite a lot of other software. That might be right. The Extreme 3D is in the system and Vmix can see it. BUT the card has TWO SDI-Inputs AFAIK, so why does VMIX offer only one Input of the card?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 1/25/2019(UTC) Posts: 302  Thanks: 17 times
Was thanked: 79 time(s) in 60 post(s)
|
i have the same card in one of my pc's, it only acts as one channel card.
input/output is possible to use as single link or dual link, that means you can have 3g oder stereophonic signals splitted in two hd signals.
with casparCG or Newblue Titler, CHB out works as key out.
without any option a normal HD signal should come out of A and B as the same, using the convert options in BM windows system control tool, CHB OUT is the converted output.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 5/13/2014(UTC) Posts: 518 Location: Manchester, UK Thanks: 2 times
Was thanked: 183 time(s) in 130 post(s)
|
Originally Posted by: burie The Extreme 3D is in the system and Vmix can see it. BUT the card has TWO SDI-Inputs AFAIK, so why does VMIX offer only one Input of the card? vMix will only see what the Blackmagic driver exposes to it. As mentioned, this card only has single channel recording/playback capability, despite the various physical I/O connections, so vMix only sees it as a single channel device.
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The vMix Forums uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
