Rank: Advanced Member
Groups: Registered
Joined: 3/20/2014(UTC) Posts: 2,721   Location: Bordeaux, France Thanks: 243 times
Was thanked: 794 time(s) in 589 post(s)
|
Originally Posted by: Joeboe 
I notice that...me too...functionality first, design later....but mine is so simple, that I can spend time on design....but that audio panel looks so nice......and like I said....you have great patience....but then again, you only need to make one channel, and then clone as many times as you need....well that is what I do....make a single channel, make it fully functional and then clone.....I like your stuff...and like I said...since I am not into audio that much, I go simple....you are good with your stuff, so keep going....and also, when you ready, just drop a zipped file...it could be just a single or 2 channel version....something small....
Everything is cloned here and uses the Group feature for 'as easy as possible" updates. However when dealing with scripts cloning won't work and somehow when you look for optimization, the clone feature is not always your best friend. For example, here, it's stupid to allow a media input to be in the "intercom" group or to have VST controls which I won't use. But that's only a version 1 beta and I built it upon what is a typical setup for my productions when I have my own audio guy with an external mixer. Yes I have already thought about possible adjustments for specific smaller or bigger projects... but I don't need this for myself on vMix, it's only designed for when a tech is in charge of the audio.
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 12/29/2019(UTC) Posts: 2 
|
When I try to open a saved file it says "This file was created with a newer version of Panel Builder! Pleas update to Panel Builder version 3.0.12 or newer"
But I have version 4.0.20. I downloaded it today and saved the file today and tried to open it today. What can be wrong?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 8/5/2017(UTC) Posts: 570  Location: Manitoba Thanks: 118 times
Was thanked: 313 time(s) in 178 post(s)
|
That is odd. If you can you send me your template file at info@studio793.ca , I will have a look at it to see why this is happening. thanks, Richard
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 7/19/2020(UTC) Posts: 4  Location: Sunshine Coast Was thanked: 1 time(s) in 1 post(s)
|
Hi guys, I think this is one of the best (if not THE best) thing happened to vMix in a lot of time. And this forum it's been very helpful. Thank you all! I'm learning a lot ;) I want to propose something. Would you mind sharing your templates? I think that would be super helpful to all of us, so we can learn from each other and improve our productions. The initial templates helped me a lot to build this super simple SCORING template for a Rugby Union game we will be streaming this weekend. I hope someone finds it useful ;)  CONTROLLER_CRL_gordie_v2.zip (2kb) downloaded 25 time(s). rugby controller.jpg (155kb) downloaded 1 time(s).Thanks to everybody!
|
 1 user thanked carlosvv for this useful post.
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 4/16/2017(UTC)
Posts: 578
Location: jamaica
Thanks: 77 times
Was thanked: 32 time(s) in 31 post(s)
|
Originally Posted by: carlosvv Hi guys, I think this is one of the best (if not THE best) thing happened to vMix in a lot of time. And this forum it's been very helpful. Thank you all! I'm learning a lot ;) I want to propose something. Would you mind sharing your templates? I think that would be super helpful to all of us, so we can learn from each other and improve our productions. The initial templates helped me a lot to build this super simple SCORING template for a Rugby Union game we will be streaming this weekend. I hope someone finds it useful ;) CONTROLLER_CRL_gordie_v2.zip (2kb) downloaded 25 time(s).Thanks to everybody! That is such a good idea...but I wish someone could post a good cricket scoreboard.....was trying for days to get a working template, but ...no luck...
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 7/19/2020(UTC) Posts: 4 Location: Sunshine Coast Was thanked: 1 time(s) in 1 post(s)
|
I hope we all jump on this idea and start sharing templates and ideas ;)
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 4/16/2017(UTC)
Posts: 578
Location: jamaica
Thanks: 77 times
Was thanked: 32 time(s) in 31 post(s)
|
This is the best app that works with vMix....I have so many switcher templates I use for different setups of vMix....so, when I go to do tennis, I open a Tennis layout in vMix, and a Tennis template in PB....and they just sync, ....best thing to happen to vMix....I am struggling to get a working template for Cricket....everything works except the totaling of the batsmen scores....
here is one of my templates...I use this mostly for conferences and lectures with Q&A
All buttons will change colour when active...Those with the Red border will change from Black to Red, so as the others....I use Green for my Preview......works like a charm...I have many others, but this is the first that was in my list.......I can upload a full Template with PNGs for anyone who need a layout with my style 3D buttons...I made them in Photoshop
...
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 7/19/2020(UTC) Posts: 4 Location: Sunshine Coast Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: Joeboe This is the best app that works with vMix....I have so many switcher templates I use for different setups of vMix....so, when I go to do tennis, I open a Tennis layout in vMix, and a Tennis template in PB....and they just sync, ....best thing to happen to vMix....I am struggling to get a working template for Cricket....everything works except the totaling of the batsmen scores....
here is one of my templates...I use this mostly for conferences and lectures with Q&A
All buttons will change colour when active...Those with the Red border will change from Black to Red, so as the others....I use Green for my Preview......works like a charm...I have many others, but this is the first that was in my list.......I can upload a full Template with PNGs for anyone who need a layout with my style 3D buttons...I made them in Photoshop
...
Wow mate! That is super cool!! Would you mind sharing the files? I would LOVE to see how have you done it and "reverse engineer" some of those functionalities ;) I really like the icons too!
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 4/16/2017(UTC)
Posts: 578
Location: jamaica
Thanks: 77 times
Was thanked: 32 time(s) in 31 post(s)
|
It was simple...no Reverse Engineering.....I just follow the instructions, use a little imagination and a few grains of common sense....some Photoshoping, and it was done..... The Icons were done in Photoshop and saved as PNG files, and I used the Icon buttons and linked them to the vMix function I wanted....it is actually very easy to do....the longest things were making the icon templates.... Having problems uploading the RAR file. ...Try this link... https://www.dropbox.com/...LDER%20TEMPLATE.rar?dl=0
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/29/2017(UTC)
Posts: 13
Thanks: 1 times
|
For a show with many artists and presenters, a lot of lower thirds are needed in the mix. Also a list of short videos.
The camera mixer is one person, a second person ensures that the videos run at the right time and the Lower thirds with the right person.
For the videolist this can easily be set up in Panel Builder. With the lower thirds is another problem. The list can be seen in the vMix screen but not on the panel builder.
With the panel builder, choices can be made with the up and down key, but I cannot show the title choice.
I would like to make this, so as not to disturb the camera mixer in vMix screen.
Is this possible in the latest version.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 8/9/2020(UTC)
Posts: 156
Thanks: 3 times
Was thanked: 20 time(s) in 19 post(s)
|
i wonder would it be possible to add NDI preview abilities to this app ?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 8/5/2017(UTC) Posts: 570 Location: Manitoba Thanks: 118 times
Was thanked: 313 time(s) in 178 post(s)
|
@ Yvo.Hx
Panel Builder uses the API XML to derive it's information. Unfortunately, the complete title preset information is not included in the API. However the "currently selected" title information is provided. I might be able to add a window that shows the fields in the currently selected title, but you would still have to use the Up/Down keys to choose the title.
@mtone
I will look into the NDI possibility.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/29/2017(UTC)
Posts: 13
Thanks: 1 times
|
Raugert,
I would be happy with your idea.
In the script of the show, the order of titles and videos is known and are already in the correct order. Having the selected title shown on the panel is a reassurance that the correct one has been chosen.
I think it's a fantastic program and fun to use.
oh, yes one more thing.
What I still experience is that when saving the same Filename, a double extension is added to the filename. That's inconvenient, right.
I am full of expectation of the adjustment.
Have a nice day
Yvo
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 4/16/2017(UTC)
Posts: 578
Location: jamaica
Thanks: 77 times
Was thanked: 32 time(s) in 31 post(s)
|
Originally Posted by: raugert @ Yvo.Hx
I might be able to add a window that shows the fields in the currently selected title, but you would still have to use the Up/Down keys to choose the title. Wow...that would be such a great addition....I already enjoy the video list, so a title list would be like great music to my ears...... @mtone I will look into the NDI possibility. .......This would be fantastic...
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 1/26/2019(UTC) Posts: 1  Location: Sai Wan Ho
|
How can I do a Sync to Tablet over the internet with ddns?
My Panel Builder is in a virtual machine in AWS and I want to do a sync to Tablet.
Many thanks!
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 8/5/2017(UTC) Posts: 570 Location: Manitoba Thanks: 118 times
Was thanked: 313 time(s) in 178 post(s)
|
Syncing to Tablet is designed to be done from a computer on a local network. I would recommend that your remote user install the Panel Builder app on his/her computer and sync from their local network. The template can be designed by another user and sent to the end user if you wish.
It sounds like you are installing/using Panel Builder from your virtual machine on AWS ? Ideally, Panel Builder should be installed on your local computer with the vMix IP in the preferences set to your DDNS address.
Richard
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 9/1/2020(UTC) Posts: 4  Location: Por Ahí
|
Hi there, amazing work.
I hope you can help me I just can't manage to get the tablet to sync with the desktop software.
The Android app connects with vMIX,and the green arrow icons are ok.
But I cant get to sync to the app and load the panels.
I have put the numbers like asked, also selected the right folder win 64.
But no success.
I'm on latest vMIX and on Latest windows 10 all updates applied.
THANKS
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 8/5/2017(UTC) Posts: 570 Location: Manitoba Thanks: 118 times
Was thanked: 313 time(s) in 178 post(s)
|
Hi Leonbeas
When you set the Panel Builder Desktop app to 'Sync to tablet', you should get an IP address that shows up in a popup window. Make sure that you enter that IP into the 'Host IP' field in the preference setting of the Panel Builder app on your tablet. The files that you want to sync from the Desktop version must be in the 'Default User Folder' as entered in the 'Prefs'.
regards,
Richard
EDIT: Also make sure that you design your panel using the "New Tablet" . Only tablet templates (.vmpbx) will sync up.
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 9/1/2020(UTC) Posts: 4 Location: Por Ahí
|
Originally Posted by: raugert Hi Leonbeas
When you set the Panel Builder Desktop app to 'Sync to tablet', you should get an IP address that shows up in a popup window. Make sure that you enter that IP into the 'Host IP' field in the preference setting of the Panel Builder app on your tablet. The files that you want to sync from the Desktop version must be in the 'Default User Folder' as entered in the 'Prefs'.
regards,
Richard
EDIT: Also make sure that you design your panel using the "New Tablet" . Only tablet templates (.vmpbx) will sync up. Thanks, yes all that was done several times with no success, any other thing I might be missing?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 8/5/2017(UTC) Posts: 570 Location: Manitoba Thanks: 118 times
Was thanked: 313 time(s) in 178 post(s)
|
@Leanbeas, Can you Email me your template file at info@studio793.ca. There may be something preventing sync. We can continue to troubleshoot offline. Thanks, Richard EDIT: It's possible that the computer you want to sync from is displaying the wrong IP in the sync window if it is not connected to the internet. You could check the IP from the command prompt and typing ipconfig. That would confirm the IP address...
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The vMix Forums uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
