vMix Forums
»
General
»
NDI
»
NDI Excessive Source Drops from vMix NDI Source only
Rank: Advanced Member
Groups: Registered
Joined: 10/25/2012(UTC) Posts: 177 Location: Barbados
Thanks: 2 times Was thanked: 24 time(s) in 24 post(s)
|
Hi, I am looking for some guidance on remedying NDI drops on a new Laptop. The peculiar thing is it only drops when the source is from a vMix output (1-4). Any other NDI source such as Birddog cameras, Cinergy Playout Software, Kiloview SDI to NDI Converter are all perfect. It is only vMix sources that have a problem. I have ruled out the network as any other computer on the same network and cable works perfectly. I have even tried external USB to ethernet adapters with no luck. The computer is a Lenovo 13th Gen Intel(R) Core(TM) i9-13900HX with 32Gigs of Ram and a 4080 graphics card running Windows 11 Home.
I have been struggling with this for a few months trying to resolve the problem. I have reinstalled Windows, made sure the Network driver was current, updated graphic drivers etc. I was running vMix26, but have since upgraded to vMix27, no change. The Problem also shows up on Studio Monitor.
Any suggestions are welcome.
Regards
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 4/23/2017(UTC) Posts: 1,174 ![Man Man](/Themes/yafpro/male.gif) Location: Germany Thanks: 3 times Was thanked: 167 time(s) in 149 post(s)
|
If the problem shows even up on studio monitor this must be a lack of resources. vMix is using full NDI as outputs. They are high bandwidth. Maybe take a look at the network utilization.
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 11/28/2015(UTC) Posts: 182
Thanks: 10 times Was thanked: 32 time(s) in 27 post(s)
|
What's the negotiated speed of the network adapter? Is it 1GBit/s?
What type and chipset is the builtin network adapter?
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 10/25/2012(UTC) Posts: 177 Location: Barbados
Thanks: 2 times Was thanked: 24 time(s) in 24 post(s)
|
Originally Posted by: mavik ![Go to Quoted Post Go to Quoted Post](/Themes/yafpro/icon_latest_reply.gif) If the problem shows even up on studio monitor this must be a lack of resources. vMix is using full NDI as outputs. They are high bandwidth. Maybe take a look at the network utilization. Hi Mavik, It is unlikely a lack of resources as the specs of the computer are quite high (see original posts for specs) and this happens with only 1 input to the computer. Using the same network-switch-cable combination on a much lower specked computer the NDI feed has no problem, so it is not a network issue as far as I can tell. Also, non vMix NDI sources (Birddog, Kiloview etc.) work perfectly well, it is only vMix NDI sources that exhibit this issue. The problem exists on any vMix source from any computer on the network, so it is not from 1 source or 1 specific computer. So long as it is a vMix souce the drops are very high. I have tried Birddog Dynamo to view the traffic, and I can see all the drops on the vMix souces while every other NDI source is perfect. Maxi
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 10/25/2012(UTC) Posts: 177 Location: Barbados
Thanks: 2 times Was thanked: 24 time(s) in 24 post(s)
|
Originally Posted by: pm ![Go to Quoted Post Go to Quoted Post](/Themes/yafpro/icon_latest_reply.gif) What's the negotiated speed of the network adapter? Is it 1GBit/s?
What type and chipset is the builtin network adapter? Hi, it is a 1Gb adapter and I have also tried a 2.5Gb adapter. The default 1Gb adapter is Realtek chipset. As indicated, it is only with vMix sources that the issue exist. Othjer non vMix NDI sources are perfectly fine. Maxi
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 4/23/2017(UTC) Posts: 1,174 ![Man Man](/Themes/yafpro/male.gif) Location: Germany Thanks: 3 times Was thanked: 167 time(s) in 149 post(s)
|
Have you tried updating the vMix NDI files manually to the latest available?
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 9/29/2022(UTC) Posts: 2 ![Taiwan, Province Of China Taiwan, Province Of China](/Content/images/flags/TW.png) Location: taipei
|
Sorry to rehash the thread. Did you find a solution for this as I have the same problem. Any NDI source to vMix plays perfectly but if NDI source is from another vMix PC, it starts to stutter.
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 10/25/2012(UTC) Posts: 177 Location: Barbados
Thanks: 2 times Was thanked: 24 time(s) in 24 post(s)
|
Unfortunaey I do not have a resolution to this as yet, but I am continuing to test when time allows. Should I find a solution, I will be sure to update this post
Maxi
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 4/23/2017(UTC) Posts: 1,174 ![Man Man](/Themes/yafpro/male.gif) Location: Germany Thanks: 3 times Was thanked: 167 time(s) in 149 post(s)
|
As I said you could try to update the NDI to the latest manually in vMix. If it's vMix to vMix you could try SRT instead and see if the drops are happening there as well.
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 9/29/2022(UTC) Posts: 2 ![Taiwan, Province Of China Taiwan, Province Of China](/Content/images/flags/TW.png) Location: taipei
|
Originally Posted by: mavik ![Go to Quoted Post Go to Quoted Post](/Themes/yafpro/icon_latest_reply.gif) As I said you could try to update the NDI to the latest manually in vMix. If it's vMix to vMix you could try SRT instead and see if the drops are happening there as well. I have manually updated to the latest NDI in vMix to no avail.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/17/2020(UTC) Posts: 10 ![United Kingdom United Kingdom](/Content/images/flags/GB.png) Location: London
|
Just to jump in to say that I've started to experience this issue recently. No logical reason for it. Only on incoming sources.
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 5/24/2014(UTC) Posts: 44 ![Man Man](/Themes/yafpro/male.gif) ![Brazil Brazil](/Content/images/flags/BR.png) Location: Brazil Thanks: 53 times Was thanked: 5 time(s) in 3 post(s)
|
I can use NDI without problem in my network. We have 12 PTZ NDI cameras in network and can work with all of them without drops but cant receive any NDI from another Vmix. Vmix NDI works good for long time but now it´s a big problem... Vmix Doesn´t work anymore.
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 10/25/2012(UTC) Posts: 177 Location: Barbados
Thanks: 2 times Was thanked: 24 time(s) in 24 post(s)
|
My experience is that it tied to vMix. If the source is a vMix ouput, I get lots of drops, freezing etc. Any other source on the same network is fine.
Maxi
|
|
|
|
vMix Forums
»
General
»
NDI
»
NDI Excessive Source Drops from vMix NDI Source only
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The vMix Forums uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close