I have 2 c027s in my case along with the Konia 3g card i use.

the trick to inputs is to load the Avermedia software first. tell it what input your card is coming from so for a HDMI signal its "Device 1 HDMI" in evermedia program but its listed in vMix as "AVerMedia BDA Analog Capture Secondary" So it can get a little confusing. also is the camera inputting into the card as a HDMI, Composiste or composite?

The steps i normaly take are
1 - Hook up camera
2 - Open Avermedia software to check the input is fine. leave the program with the input that i can see.
3 - Load up vMix
4 - Load the camera, check to make sure its the same setting as the camera is sending out (auto is good but it sounds like your having issues)
5 - Check to make sure the Input is set to the correct input and other info

Also look at avermedia website to make sure your drivers are up to date.

Thanks for the replies guys!

LAJDigital:

Our camera is SD 720 X 480 so the out from the camera (and input into the Card 1 is composite). I have opened up Avermedia mediacenter 3D and can see the signal coming into the software. It is on composite. I also have our presentation computer (which we use to project scripture and videos for the sanctuary) connected to card 2 and is coming in on Avermedia secondary 1 as S-Video. I also see that in the Avermedia Mediacenter 3D when I choose Avermedia secondary S-Video.

So my options are as follows:

Avermedia Capture:
Composite - Camera signal
Component - Not currently used
S-video - not currently used
HDMI - Not currently used

Avermedeia Capture Secondary:
Composite - Not currently used
Component - Not currently used
S-video - Presentation computer
HDMI - Not currently used

Now, in Vmix, when I choose to add a camera, I have these options:

In the first dropdown I can choose:
AVerMedia BDA Analog Capture
AVerMedia BDA Analog Capture
AVerMedia BDA Analog Capture Secondary
AVerMedia BDA Analog Capture Secondary.

In the second dropdown I can choose:
Composite
S-Video
Component
HDMI

So, for example if I want to load the camera, I would choose the following:

AVerMedia BDA Analog Capture (the first one), then in the second dropdown, composite and would expect to see camera, however I get the words "no signal"...

If I want to load the presentation pc, I would choose the following:

AVerMedia BDA Analog Capture Secondary (the first one), then in teh second dropdown, S-Video and would expect to see the pc output, however I get the words "No signal"...

Those the the ones I would choose in Vidblaster as well and would get the expected results. Maybe that's not the right options to choose in Vmix...


Charssay:

On the C027 cards, both jacks are shaped like HDMI however, I am using the provided adapter that plugs into the primary slot on the card and then connecting the composite or S-Video to the adapter.

To be honest I have never chosen the HDMI option is Vmix because neither of my sources are HDMI. I guess the next time out at the church I can try choosing HDMI. Maybe Vmix sees both slots on the card as HDMI... I don't know, but if that's the case, VMIX should see 4 HDMI inputs from the 2 Avermedia cards I have.