logo

Live Production Software Forums


Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
fwieland  
#1 Posted : Thursday, June 13, 2024 6:42:29 AM(UTC)
fwieland

Rank: Advanced Member

Groups: Registered
Joined: 11/21/2020(UTC)
Posts: 36
Switzerland
Location: Zuerich

Thanks: 7 times
Was thanked: 1 time(s) in 1 post(s)
Very strange analog audio problem with the Aja i/o x3: The only driver available is the Kona ASIO driver, which I selected. To test the analog inputs through the DB25 connector, I used a DB25 to XLR adapter and measured the pins with a multimeter and the wiring of the DB25 is 100% correct (Tascam Standard). In the Aja control panel, I set the audio configuration in the Aja control panel to 8 inputs and created a mono audio input for each Kona ASIO channel in vMix to test where the signal is going. ASIO input 1 is not showing up anywhere, ASIO input 2 is the physical input 1 on the DB25 connector, ASIO input 3 is then physical input 2 on the DB25 connector. And so on (ASIO Input 9 is physical input 8). Can someone help me out here?
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.