I’m using vMix with a ZEDi 10FX USB mixer and vMix Pro 25.0.0.34

1) My Microphone is plugged into channel 1 on the USB mixer. I’ve created an input in vMix for that mic (to setup I selected ZEDI ASIO Driver, and ch1 in audio setup) and it’s showing up fine in vMix

2) I’ve connected a USB cable from the USB mixer to the PC

3) IN vMix: I’ve got a vMix call input, a video clip input, and the Mic


Everything works fine EXCEPT:

A) When I route audio from vMix, I’m not sure what settings to use?

In SETTINGS/AUDIO OUTPUTS:
IF I select the ZEDI Stereo USB output for Master Out and Headphones , that comes over to the mixer via the USB fine and can be heard through the speakers (those are attached to the mixer’s analog MONITOR OUT).
On the mixer - I send that channels OUT via an aux to feed In-Ear IFB for my HOST
With those settings: In the HOSTS ear, she’s getting her mic feed, RETURNED through her headphones (with a slight delay).

I want a mix-minus fed to her (without her mic)

B) I’ve tried to setup Bus A and Bus B, build a mix with all inputs active on Bus B -except the HOST’s Mic, When I get that setup, I don’t know how to get that back to the host?
I’ve got the Bus pulldown (in Audio Output settings) Enabled, and I’ve tried changing those settings to ZEDi Mixer… Just can’t seem to find the right setting...
How do I get Bus B to Show Up back on my Mixer.


To SUM UP:

I want to setup a Mix Minus (to send to my in studio Host.
I’ve got ONE mic plugged into the USB Mixer - That’s being sent out USB to an INPUT in vMix
The vMix Caller, and a movie file audio is (of course) already in vMix, is being sent OUT USB to the Mixer (so that I can monitor the MASTER audio, and have a separate Mix Minus to send out to Host

Thanks in Advance

/S