logo

Live Production Software Forums


Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
TrevoorB  
#1 Posted : Sunday, February 14, 2021 9:35:24 AM(UTC)
TrevoorB

Rank: Member

Groups: Registered
Joined: 4/2/2015(UTC)
Posts: 12
Man
United Kingdom
Location: UK

Was thanked: 1 time(s) in 1 post(s)
old GVG 100 panel now converted to drive Vmix, I have had a small batch of PCB's made and have now populated one and soak tested one, really pleased Decmber PCB 2.png (381kb) downloaded 3 time(s). C2vzghfUcAIuqDg.jpg (170kb) downloaded 4 time(s). PTZ3.jpg (414kb) downloaded 2 time(s).
It uses a 19v laptop PSU and I have now added an inexpensive PTZ I think you can see it working on the CQ-DATV facebook
thanks 1 user thanked TrevoorB for this useful post.
VALSY on 11/22/2022(UTC)
VALSY  
#2 Posted : Wednesday, November 23, 2022 8:12:12 PM(UTC)
VALSY

Rank: Newbie

Groups: Registered
Joined: 11/22/2022(UTC)
Posts: 5
France

Thanks: 1 times
Hello , where can i find your PCB for control the GVG100;
THANK YOU
TrevoorB  
#3 Posted : Wednesday, November 23, 2022 9:00:43 PM(UTC)
TrevoorB

Rank: Member

Groups: Registered
Joined: 4/2/2015(UTC)
Posts: 12
Man
United Kingdom
Location: UK

Was thanked: 1 time(s) in 1 post(s)
Hi Its a while since I wrote up that project I may have a PCB left, do you have a mixer ???
VALSY  
#4 Posted : Thursday, November 24, 2022 12:05:53 AM(UTC)
VALSY

Rank: Newbie

Groups: Registered
Joined: 11/22/2022(UTC)
Posts: 5
France

Thanks: 1 times
Yes , i have a GVG100
VALSY  
#5 Posted : Thursday, November 24, 2022 12:18:24 AM(UTC)
VALSY

Rank: Newbie

Groups: Registered
Joined: 11/22/2022(UTC)
Posts: 5
France

Thanks: 1 times
or If you just have a small diagram to make an i2c interface between the GVG100 and the Arduino, I'm interested. Thank you
TrevoorB  
#6 Posted : Thursday, November 24, 2022 2:44:30 AM(UTC)
TrevoorB

Rank: Member

Groups: Registered
Joined: 4/2/2015(UTC)
Posts: 12
Man
United Kingdom
Location: UK

Was thanked: 1 time(s) in 1 post(s)
Ypou need to visit

https://cq-datv.ianp.uk/ebooks.php

I think the story starts in CQ-DATV magazine no 68 onwards, They are all free and stored as PDF files
The software and circuits are on the download section of the same site
I have found a PCB if you PayPal £15 to videovault@sky.com
I will post out the last PCB to you (need an address)

We only had s small run of PCB's made and there were a few revisions needed that are now all part of the final PCB

Good Luck it is a brilliant mixer and pleased you have one and that this project will bring it back to life

Let me know how you get on

Trevor
VALSY  
#7 Posted : Thursday, November 24, 2022 2:59:21 AM(UTC)
VALSY

Rank: Newbie

Groups: Registered
Joined: 11/22/2022(UTC)
Posts: 5
France

Thanks: 1 times
Thank you for your quick response. I would have liked to buy your pcb but I do not know the cost of shipping to France and do not see how to pay in euros. I will take the time to read the magazine on the subject with my English school. thank you again
VALSY  
#8 Posted : Thursday, November 24, 2022 9:17:55 PM(UTC)
VALSY

Rank: Newbie

Groups: Registered
Joined: 11/22/2022(UTC)
Posts: 5
France

Thanks: 1 times
Hello trevoorB. thank you for your answers but after looking at all your articles on GVG100 interfave for vMIX, I must admit that it is too complicated for me. I was hoping to revive this great GRASS VALLEY mixer rather to see it finish at the recycling center and I imagined an interface that was easier to manufacture. But I see that my knowledge of electronics is too limited to try to reproduce your PCB card. Thank you again.
TrevoorB  
#9 Posted : Friday, November 25, 2022 11:22:25 PM(UTC)
TrevoorB

Rank: Member

Groups: Registered
Joined: 4/2/2015(UTC)
Posts: 12
Man
United Kingdom
Location: UK

Was thanked: 1 time(s) in 1 post(s)
Sorry Valsy

It is a rather complex solution, they were really nice mixers and I had hoped to see that some of them survived.
There is another conversion on the internet by Baz that interfaces them to the Black Magic switcher, that might be more use to you

Sorry I did not mean to make it complex its just the way it turned out.

Please dont break up your panel they still sell on ebay and somebody else might want to do either mine or Baz's conversion

Take Care

Trevor
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.