logo

Live Production Software Forums

www.vmix.com

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
UMC ASIO hardware Audio output not working for bus - UMC1820
Options
Go to last post Go to first unread
Previous Topic Next Topic
russoandrew  
#1 Posted : Thursday, October 1, 2020 12:27:38 AM(UTC)
russoandrew

Rank: Newbie

Groups: Registered
Joined: 9/30/2020(UTC)
Posts: 4
United States

Thanks: 1 times
I have a UMC 1820 and I am using it as an input device for microphones into Vmix. This is working perfectly. I want to use audio busses to send a specific microphone out to an output. When i sed up an audio bus and select an output it does not send any audio to the umc1820 output channels. If i select the same output name in windows and set it as the default it works just fine and sends out the master and also is able to send out audio from youtube and other local audio sources. Not sure why VMIX is unable to send to the output
Any help would be greatly appreciated.
Back to top

Wanna join the discussion?! Login to your vMix Forums forum account, or Register a new forum account.
Back to top  
mtone  
#2 Posted : Thursday, October 1, 2020 1:04:30 AM(UTC)
mtone

Rank: Advanced Member

Groups: Registered
Joined: 8/9/2020(UTC)
Posts: 156

Thanks: 3 times
Was thanked: 20 time(s) in 19 post(s)
here is the basic setup to double check..

set the buss outputs to the preferred ASIO driver outputs in vmix settings.. make sure you have audio signal being routed to those busses in the vmix mixer.. Also make sure you have turned on the buss channel (i think channels are off by default ?) and that the channel isnt muted and fader is up.. At that point you should get signal at the outputs on the interface.. if you dont hear anything and the UMC comes with its own mixer software then check to see if its showing a signal on those outputs in the UMC mixer and verify nothing is muted or no faders are down..
Back to top
russoandrew  
#3 Posted : Thursday, October 1, 2020 4:42:16 AM(UTC)
russoandrew

Rank: Newbie

Groups: Registered
Joined: 9/30/2020(UTC)
Posts: 4
United States

Thanks: 1 times
I think i have all the settings correct. I attached pictures showing the config i have. Just realized i circled bus G but i meant to circle Bus F in the image. audio mixer.PNG (110kb) downloaded 0 time(s). settings.PNG (44kb) downloaded 1 time(s).
Back to top
russoandrew  
#4 Posted : Thursday, October 1, 2020 5:36:27 AM(UTC)
russoandrew

Rank: Newbie

Groups: Registered
Joined: 9/30/2020(UTC)
Posts: 4
United States

Thanks: 1 times
I think i found the issue. I uninstalled the driver. I was running 4.59 which is latest. I then installed 4.38 and it is now working... TY for your help.
Back to top
Users browsing this topic
Guest (4)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.090 seconds.