logo

Live Production Software Forums


Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
shinyidol  
#1 Posted : Thursday, June 25, 2020 7:24:03 AM(UTC)
shinyidol

Rank: Member

Groups: Registered
Joined: 3/20/2019(UTC)
Posts: 23
United States
Location: San Diego

Was thanked: 3 time(s) in 2 post(s)
how do you change the viewport when zoomed in on a multiview panel?

I'm trying to check for pixel accuracy, and can't move around.
TobinT  
#2 Posted : Thursday, June 25, 2020 7:37:53 AM(UTC)
TobinT

Rank: Advanced Member

Groups: Registered
Joined: 12/4/2018(UTC)
Posts: 31
Belgium
Location: Brussels

Thanks: 2 times
Was thanked: 9 time(s) in 9 post(s)
Click on the cog on the multiview input and then use the zoom and pan controls under the positioning sub menu.
shinyidol  
#3 Posted : Thursday, June 25, 2020 8:31:01 AM(UTC)
shinyidol

Rank: Member

Groups: Registered
Joined: 3/20/2019(UTC)
Posts: 23
United States
Location: San Diego

Was thanked: 3 time(s) in 2 post(s)
Originally Posted by: TobinT Go to Quoted Post
Click on the cog on the multiview input and then use the zoom and pan controls under the positioning sub menu.
I don't see a pan slider. There is a zoom slider on the right, but nothing to pan left and right or up and down.

I'm talking about the preview view after you click the cog. You can zoom in there, but it zooms just to the center of the layer.
Simsyuk  
#4 Posted : Thursday, June 25, 2020 9:08:02 PM(UTC)
Simsyuk

Rank: Advanced Member

Groups: Registered
Joined: 8/16/2019(UTC)
Posts: 130
United Kingdom

Thanks: 22 times
Was thanked: 6 time(s) in 4 post(s)
I usually just click on the image and move it around to where I want it, then I use the crop sliders if needed.
shinyidol  
#5 Posted : Friday, June 26, 2020 2:19:42 AM(UTC)
shinyidol

Rank: Member

Groups: Registered
Joined: 3/20/2019(UTC)
Posts: 23
United States
Location: San Diego

Was thanked: 3 time(s) in 2 post(s)
Originally Posted by: Simsyuk Go to Quoted Post
I usually just click on the image and move it around to where I want it, then I use the crop sliders if needed.
Totally unrelated to the question I am asking. I can't even click on the image because it isn't on the screen when zoomed in.

I'm talking about in the multipanel view you can ZOOM, but the zoom just zooms to the center of whatever layer you are looking at. How do you move the active view left, right, up or down NOT using the tools to manipulate the layer (size, position, cropping, rotation).

If this were photoshop you zoom into an image and hold spacebar which changes the mouse icon to a hand which lets you move the view to where you want it.

How do you do that.
doggy  
#6 Posted : Friday, June 26, 2020 2:36:50 AM(UTC)
doggy

Rank: Advanced Member

Groups: Registered
Joined: 12/27/2012(UTC)
Posts: 1,992
Belgium
Location: Belgium

Thanks: 97 times
Was thanked: 364 time(s) in 300 post(s)
Might be helpful if one is consistent with terminologie : Multiview... multipanel..
Sure it's not Photoshop

and please specify : you want to work on zoom for the input or the individual layer ?
In either case clickhold on the image will move the image of the input or the individual layer selected ( or use the pan slider)
shinyidol  
#7 Posted : Friday, June 26, 2020 3:34:15 AM(UTC)
shinyidol

Rank: Member

Groups: Registered
Joined: 3/20/2019(UTC)
Posts: 23
United States
Location: San Diego

Was thanked: 3 time(s) in 2 post(s)
Originally Posted by: doggy Go to Quoted Post
Might be helpful if one is consistent with terminologie : Multiview... multipanel..
Sure it's not Photoshop

and please specify : you want to work on zoom for the input or the individual layer ?
In either case clickhold on the image will move the image of the input or the individual layer selected ( or use the pan slider)
I don't want to move the layer. Click and hold changes the position of the layer. I just want to change what I am zooming into.

I'm baffled this is so confusing.

UserPostedImage

UserPostedImage
doggy  
#8 Posted : Friday, June 26, 2020 3:56:19 AM(UTC)
doggy

Rank: Advanced Member

Groups: Registered
Joined: 12/27/2012(UTC)
Posts: 1,992
Belgium
Location: Belgium

Thanks: 97 times
Was thanked: 364 time(s) in 300 post(s)
LOL, heck i never ever used that slider , didn't even notice it was there.

Why do you have multiview selected when you have no additional layers in the first place as then yes the dragging as mentioned before doesnt work then (does if you have layers added) , just select position (the one above MultiView)


?t=392

position2.JPG (81kb) downloaded 0 time(s).
shinyidol  
#9 Posted : Friday, June 26, 2020 4:19:19 AM(UTC)
shinyidol

Rank: Member

Groups: Registered
Joined: 3/20/2019(UTC)
Posts: 23
United States
Location: San Diego

Was thanked: 3 time(s) in 2 post(s)
Originally Posted by: doggy Go to Quoted Post
LOL, heck i never ever used that slider , didn't even notice it was there.

Why do you have multiview selected when you have no additional layers in the first place as then yes the dragging as mentioned before doesnt work then (does if you have layers added) , just select position (the one above MultiView)

that was just a simple screenshot to show the tools, not my actual project.

The actual project has multiple layers. What I'm trying to do is move the view to the left, so I can align some overlays to be pixel accurate and if I need to use any of the actual layer edit sliders.
doggy  
#10 Posted : Friday, June 26, 2020 5:13:01 AM(UTC)
doggy

Rank: Advanced Member

Groups: Registered
Joined: 12/27/2012(UTC)
Posts: 1,992
Belgium
Location: Belgium

Thanks: 97 times
Was thanked: 364 time(s) in 300 post(s)
select the position tab next to the layer you want to adjust (if in multiview) or dropdown to select the layer one wants to adjust ( once in "position" selection) . Main in de dropdown will adjust all layers otgether)
dBeau  
#11 Posted : Friday, June 26, 2020 11:44:14 AM(UTC)
dBeau

Rank: Newbie

Groups: Registered
Joined: 5/26/2020(UTC)
Posts: 3
United States
Location: Boston

For what it's worth... me too! What I mean is, I think I get what shinyidol is asking and I've been frustrated by it too.

The problem shows when trying to build a MultiView. Start with a background image that shows a video monitor and then try to overlay the contents of an input on top of the monitor. While the basic steps to do this are fairly straight forward, doing it with any amount of precision, especially when rotations are needed, is very difficult. Short of editing the zoom, pan, and rotation values by hand, I'm coming up empty.

If I'm reading correctly, shinyidol is hoping to zoom in to the background image but only while trying to align the overlay. By zooming in during the parameter edit, it would be easier to see when everything is aligned. Going full screen only helps a little because the sensitivity of mouse movements doesnt change.

Now if I've got the problem description down, I'd like to know how to approach it too! But, I'd also be happy to hear other suggestions for how to precisely place an overlay. Of course apologies to shinyidol if I misunderstood... I'll just sulk back to my corner and start my own thread.
doggy  
#12 Posted : Friday, June 26, 2020 4:38:36 PM(UTC)
doggy

Rank: Advanced Member

Groups: Registered
Joined: 12/27/2012(UTC)
Posts: 1,992
Belgium
Location: Belgium

Thanks: 97 times
Was thanked: 364 time(s) in 300 post(s)
Quote:
doing it with any amount of precision, especially when rotations are needed, is very difficult. Short of editing the zoom, pan, and rotation values by hand, I'm coming up empty.


When one holds the mousepointer over one to the slider thingies one can use the mousewheel to adjust more precisely
dBeau  
#13 Posted : Saturday, June 27, 2020 10:16:08 PM(UTC)
dBeau

Rank: Newbie

Groups: Registered
Joined: 5/26/2020(UTC)
Posts: 3
United States
Location: Boston

Originally Posted by: doggy Go to Quoted Post
When one holds the mousepointer over one to the slider thingies one can use the mousewheel to adjust more precisely


Thanks for the reply doggy. The mousewheel is a great help, but even with it getting down to single pixel moves is near impossible in many cases.

For operations like this I suspect an external program will be necessary to get the required accuracy. Are there any? Maybe the virtual set feature is the way to go? I’ve managed to replace the images in existing virtual sets but haven’t managed to find an editor for positioning the pieces. Is there any software out there that understands the file format? How about a white paper that describes the coordinate system and transformations?

Joeboe  
#14 Posted : Saturday, June 27, 2020 10:57:55 PM(UTC)
Joeboe

Rank: Advanced Member

Groups: Registered
Joined: 4/16/2017(UTC)
Posts: 331
Location: jamaica

Thanks: 46 times
Was thanked: 18 time(s) in 18 post(s)
I dont seem to understand exactly what the question is, but if I want to zoom with any form of accuracy, when moving the sliders, I try to get as near as I can to what I want, and the adjust the numbers one digit at a time to see how much I am moving....in that way I get as accurate as possible....not by just rolling the mouse wheel...e.g:..1.245, then 1.246 etc. try that, will take some time, but should yield the results needed
doggy  
#15 Posted : Sunday, June 28, 2020 12:10:23 AM(UTC)
doggy

Rank: Advanced Member

Groups: Registered
Joined: 12/27/2012(UTC)
Posts: 1,992
Belgium
Location: Belgium

Thanks: 97 times
Was thanked: 364 time(s) in 300 post(s)
not to mention if you click on one of the slider indicators you can use the arrow buttons too (is what one finds out trying stuff ;-) )
dBeau  
#16 Posted : Monday, June 29, 2020 5:55:50 AM(UTC)
dBeau

Rank: Newbie

Groups: Registered
Joined: 5/26/2020(UTC)
Posts: 3
United States
Location: Boston

Originally Posted by: doggy Go to Quoted Post
not to mention if you click on one of the slider indicators you can use the arrow buttons too (is what one finds out trying stuff ;-) )


Since they use the smallest increment, the arrow buttons seems to be the best option. Thanks for the tip.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.