logo

Live Production Software Forums


Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
TWOTC  
#1 Posted : Tuesday, June 25, 2019 11:03:15 AM(UTC)
TWOTC

Rank: Newbie

Groups: Registered
Joined: 6/11/2019(UTC)
Posts: 3
United States
Location: Apple Valley

I am trying to set up two cameras to stream via rtsp, each time get an error message. I also try loading the cameras through VLC, the browser will show up but the camera is not visible. Can anyone give me some advise to how I can get these cameras to stream. Or the correct rtsp://address and ended after the port address
desmar  
#2 Posted : Tuesday, June 25, 2019 12:27:27 PM(UTC)
desmar

Rank: Advanced Member

Groups: Registered
Joined: 8/21/2015(UTC)
Posts: 302
Man
Canada
Location: Cornwall, Ontario, Canada

Thanks: 15 times
Was thanked: 74 time(s) in 55 post(s)
rtsp://USERNAME:PASSWORD@IPADDRESS:554/cam/realmonitor?channel=1&subtype=0&proto=Onvif

USERNAME = username
PASSWORD = password
IPADDRESS = address of ip camera eg. 192.168.0.19

eg.

rtsp://USERNAME:PASSWORD@192.168.0.19:554/cam/realmonitor?channel=1&subtype=0&proto=Onvif

Add stream input via RTSP.

rtsp.png (18kb) downloaded 0 time(s).

Add stream input via VLC.

vlc.png (19kb) downloaded 0 time(s).

Originally Posted by: TWOTC Go to Quoted Post
I am trying to set up two cameras to stream via rtsp, each time get an error message. I also try loading the cameras through VLC, the browser will show up but the camera is not visible. Can anyone give me some advise to how I can get these cameras to stream. Or the correct rtsp://address and ended after the port address
TWOTC  
#3 Posted : Tuesday, June 25, 2019 1:35:47 PM(UTC)
TWOTC

Rank: Newbie

Groups: Registered
Joined: 6/11/2019(UTC)
Posts: 3
United States
Location: Apple Valley

Thank you for the info, I will give this a try tomorrow. Will add the User name of Camera and than the Password of Camera @ Ip Address and port 554 which is default for Amcrest rtsp. I hope pray it sees the log in box. I was trying to find out how to disable the box login in credential completely. That way there would be nothing preventing the browser from opening once you went to the ip address.
TWOTC  
#4 Posted : Wednesday, June 26, 2019 4:02:47 AM(UTC)
TWOTC

Rank: Newbie

Groups: Registered
Joined: 6/11/2019(UTC)
Posts: 3
United States
Location: Apple Valley

Thank you very much,was able to get the cameras to become visible without having to go through VLC. So yes it worked. I think the cameras need to be active in the browser prior to streaming. Once again thank you. rtsp://admin:username@ipaddress:port
RickHarley  
#5 Posted : Wednesday, July 3, 2019 9:16:01 PM(UTC)
RickHarley

Rank: Newbie

Groups: Registered
Joined: 7/3/2019(UTC)
Posts: 1
Man
United States
Location: Miami

I have same problems with me eyecam. Loading the cameras through VLC its a nonses. Just contact to support. I advice buy eyecam on https://www.eyerideonline.com/
Mari  
#6 Posted : Thursday, July 4, 2019 12:52:58 AM(UTC)
Mari

Rank: Advanced Member

Groups: Registered
Joined: 2/14/2016(UTC)
Posts: 104
Netherlands
Location: Oss

Thanks: 12 times
Was thanked: 14 time(s) in 13 post(s)
I have used (and still using) 2 Foscam IP-cams... Normally you can find in the manual how to open an RTSP-stream.
For my Foscam IP-Cams (C2) it is: rtsp://username:password@IP-address:Port/VideoMain (RTSP over UDP)

No need for opening a browser or VLC...
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.