Update: Have got documentation from the manufacturer that the PTZ controls in vMix should work with the cameras. I have orderd one camera for testing. I will get back when I tested it out.

We bought the Minrray 20x NDI HDX camera and decided to swap it out, taking the place of the PTZ Optics camera 12x, for the higher zoom. Video quality is fine. Camera seems solid. BUT, getting it to work in vMix with PTZ is another matter.

You say it works like a charm with vmix. How do I set it up to use PTZ so I can control the camera and set inputs for presets and such? Our 30x ptzoptics cam is a cinch to setup, but I've tried every option in the PTZ control screen and none of them will make the camera move/zoom. Any suggestions??

UPDATE: I have now received 2 Minrray PTZ UV510A with NDI and PoE and the Minrray PTZ control KBD2000. I have connected the cameras to the control and to vMix. Everything works without problems.

If you have some basic knowledge about computer networking, it was no problem and not difficult. The important thing is to keep the devices on the same subnet.

Video via NDI works well. Maybe around 1-1.5 frames delay according to my first quick tests but nothing you notice that much. I had more delay when I connected it via SDI through Blackmagic Ultrastudio Mini via Thunderbolt 3. That was a bit strange but so was my test results.

PTZ control from vMix works fine without problems. Can control the camera and program different presets on different inputs.

There is nothing wrong with the video quality. Feels fully acceptable for a 1/2.8" sensor.

Overall I am very happy with the cameras this far and they had a very good price compared to other PTZ cameras.

Hi Will

I can't remember having any issues with this setting up my 2 cameras, which by the way works as they should and I am satisfied.
On the other hand, it's been a while since I did that.

I use the cameras with PoE and NDI.
I use vMix and can both receive video by NDI and control the camera from vMix with different presets and positions.

If I remember correctly, the first time you connect to the camera by ethernet, however, you must set up your computer's network card manually so that it has the same subnet as the camera. The camera's original IP address is in the camera's manual if I remember correctly.

Good luck!

Hola estoy probando la cámara minrray UV510A y noto que tiene mucho ruido a baja luz, mucha aberración cromática. es así o será un problema configuración de la cámara?