vMix Forums
»
General
»
3rd Party Software and Development
»
Wireless Tally Light for $10 M5Stick-C (ESP32-Board) for vMix
Rank: Advanced Member
Groups: Registered
Joined: 5/19/2017(UTC) Posts: 92   Location: The Netherlands Thanks: 12 times
Was thanked: 34 time(s) in 22 post(s)
|
Hi Micha, Thanks for your contribution! But I'd rather add a plugin than to change the core code. Are you able to develop a plugin? An example can be found in plugins/LED_HAT.h
Thanks in advance
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 5/19/2017(UTC) Posts: 92 Location: The Netherlands Thanks: 12 times
Was thanked: 34 time(s) in 22 post(s)
|
Originally Posted by: bezzgeadas  hello everyone, thanks for the code, I was able to load the code and configure the vmix ip address: but when changing the entry I chose to safe, pre and live the m5stick c status does not change and is always safe. can help.
Thanks
Luís Geadas The tally number needs to correspond to the input number in vMix as well
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 11/17/2020(UTC) Posts: 2  Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: guidogast Hi Micha, Thanks for your contribution! But I'd rather add a plugin than to change the core code. Are you able to develop a plugin? An example can be found in plugins/LED_HAT.h
Thanks in advance Hi, sorry. I'm not able to do this. But I think, this small change, is good in the main code. Furthermore, the call of the function, is a change of the code necessary. Best Regards, Michael
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 1/14/2018(UTC)
Posts: 153
Location: Texas
Thanks: 6 times
Was thanked: 9 time(s) in 5 post(s)
|
Hi guidogast. Thank You for your great code. I have posted a suggestion and a possible bug to github. :)
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 1/16/2018(UTC)
Posts: 36
Location: Bern, Switzerland
Thanks: 4 times
Was thanked: 3 time(s) in 3 post(s)
|
Great Tool and execution, finaly a simple enough solution for cheapo integrated tally lights.
Can anyone maybe point me in the right direction: Moving our VMIX Machines from Event to Event, using local LAN and 4G Sticks bonded via Speedify to get some sort of redundancy. For not having to hook up the Tallys everytime, would anyone know how to add a WLAN router to have them work on a fixed WLAN and therefore work even though there's changing adresses for the internet connection?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 10/26/2020(UTC) Posts: 76  Location: Maryland Thanks: 2 times
Was thanked: 26 time(s) in 20 post(s)
|
Originally Posted by: hidavid Great Tool and execution, finaly a simple enough solution for cheapo integrated tally lights.
Can anyone maybe point me in the right direction: Moving our VMIX Machines from Event to Event, using local LAN and 4G Sticks bonded via Speedify to get some sort of redundancy. For not having to hook up the Tallys everytime, would anyone know how to add a WLAN router to have them work on a fixed WLAN and therefore work even though there's changing adresses for the internet connection? Personally, I would make a separate network out of it... Not for bandwidth reasons obviously, but to have something that is a consistent setup. It also let's you go cheaper on the router for the same reasons. From there it's your choice on how to connect your vMix system to it, whether it be Ethernet or more WiFi. I believe there is a potential for some issues if that tally network winds up being the same subnet as the other networks you use. You can reduce those odds, but not eliminate them.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 5/19/2017(UTC) Posts: 92 Location: The Netherlands Thanks: 12 times
Was thanked: 34 time(s) in 22 post(s)
|
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 10/5/2018(UTC) Posts: 34 Location: Tucson
|
Stupid question, how do you turn off the m5stickc when not in use?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 5/19/2017(UTC) Posts: 92 Location: The Netherlands Thanks: 12 times
Was thanked: 34 time(s) in 22 post(s)
|
You need to manually turn it off by holding the power button for 6 seconds. There's no sleep functionality
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 3/9/2016(UTC) Posts: 33 Location: Cotswolds, UK
|
Hi Guys,
I am in Aduino in the boards manager trying to search for esp32 but its not there. I assume I just install the M5stack folder instead? The video tutorial you made that I am following seems out of date now to what is happing in the later part of the install.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 5/19/2017(UTC) Posts: 92 Location: The Netherlands Thanks: 12 times
Was thanked: 34 time(s) in 22 post(s)
|
Originally Posted by: solo16 Hi Guys,
I am in Aduino in the boards manager trying to search for esp32 but its not there. I assume I just install the M5stack folder instead? The video tutorial you made that I am following seems out of date now to what is happing in the later part of the install. All you have to do is follow the written tutorial that I point to on the M5Stack website, that's still accurate. Instead of looking for esp32, look for M5Stack.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 3/9/2016(UTC) Posts: 33 Location: Cotswolds, UK
|
Yes all done and working great thank you.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 4/6/2016(UTC) Posts: 84 Location: Sweden Thanks: 25 times
Was thanked: 18 time(s) in 13 post(s)
|
Originally Posted by: Babbit Originally Posted by: hidavid Great Tool and execution, finaly a simple enough solution for cheapo integrated tally lights.
Can anyone maybe point me in the right direction: Moving our VMIX Machines from Event to Event, using local LAN and 4G Sticks bonded via Speedify to get some sort of redundancy. For not having to hook up the Tallys everytime, would anyone know how to add a WLAN router to have them work on a fixed WLAN and therefore work even though there's changing adresses for the internet connection? Personally, I would make a separate network out of it... Not for bandwidth reasons obviously, but to have something that is a consistent setup. It also let's you go cheaper on the router for the same reasons. From there it's your choice on how to connect your vMix system to it, whether it be Ethernet or more WiFi. I believe there is a potential for some issues if that tally network winds up being the same subnet as the other networks you use. You can reduce those odds, but not eliminate them. A nasty, but functional way to configure a roaming network: Bring your own Internet router. Have the WAN configured for DHCP. On the LAN side, pick a public IP range that has been registered for a company you'll never need to communicate with. Preferably a company who owns a /24 IP range (254 IPs). Use that same range on your LAN and make sure you have NAT enabled. This way, you'll not be able to communicate with that IP range on Internet, but you are almost certain that you have a different subnet than whatever your customer have. If you are in Europe or America, you can probably find something to use in https://www.apnic.net/ Personally, I use a Ubiquity Edgerouters Lite. It has 3 interfaces: One for WAN: (DHCP enabled) One for DMZ: (DHCP enabled, used for connecting to additional, local networks - with port forwarding to my vMix system.) One for LAN: providing DNS, DHCP and Routing capability.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/2/2021(UTC) Posts: 14  Location: Moscow Region Thanks: 5 times
|
Guido thank you for your project! Please write me your bank card number in private messages, I don't have a paypal account and I can't thank you.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 5/19/2017(UTC) Posts: 92 Location: The Netherlands Thanks: 12 times
Was thanked: 34 time(s) in 22 post(s)
|
Hi Vyacheslav, since I don't have the LED module you have, I can't test it for you. Can you tell me the following: - Amount of LEDs on your WS2812 strip/board - How do you connect it to the Stick? This could give me some pointers as to explain what you need to change in the code to make it work. Thank you for wanting to support me. You can do that via Buy me a Coffee: https://www.buymeacoffee.com/guidovisserThe service allows you to use a credit or debit card alongside of paypal. Hopefully that works for you. Otherwise, no worries, you using my solution is payment enough 😄
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/2/2021(UTC) Posts: 14 Location: Moscow Region Thanks: 5 times
|
Originally Posted by: guidogast Hi Vyacheslav, since I don't have the LED module you have, I can't test it for you.
Can you tell me the following:
- Amount of LEDs on your WS2812 strip/board
- How do you connect it to the Stick?
This could give me some pointers as to explain what you need to change in the code to make it work.
Guido thanks a lot, I've just been able to figure out the code. And now everything works fine! The WS2812 LED is just one. I want to take it out on the camera body. Originally Posted by: guidogast Thank you for wanting to support me. You can do that via Buy me a Coffee: https://www.buymeacoffee.com/guidovisserThe service allows you to use a credit or debit card alongside of paypal. Hopefully that works for you. Otherwise, no worries, you using my solution is payment enough 😄 I will definitely thank you for your great work! Thank you very much!
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 5/19/2017(UTC) Posts: 92 Location: The Netherlands Thanks: 12 times
Was thanked: 34 time(s) in 22 post(s)
|
Originally Posted by: Vyacheslav Originally Posted by: guidogast Hi Vyacheslav, since I don't have the LED module you have, I can't test it for you.
Can you tell me the following:
- Amount of LEDs on your WS2812 strip/board
- How do you connect it to the Stick?
This could give me some pointers as to explain what you need to change in the code to make it work.
Guido thanks a lot, I've just been able to figure out the code. And now everything works fine! The WS2812 LED is just one. I want to take it out on the camera body. Originally Posted by: guidogast Thank you for wanting to support me. You can do that via Buy me a Coffee: https://www.buymeacoffee.com/guidovisserThe service allows you to use a credit or debit card alongside of paypal. Hopefully that works for you. Otherwise, no worries, you using my solution is payment enough 😄 I will definitely thank you for your great work! Thank you very much! Glad everything is working for you now, goodluck!
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/26/2021(UTC) Posts: 26  Location: Norway
|
Is it possible to configure it to react on Preview/Live on Mix 2? I'm using Mix 2 as a camera switcher and the primary Preview/Live to change my layouts. For example multiview etcs.
If so, how would I do this? Thanks.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 5/19/2017(UTC) Posts: 92 Location: The Netherlands Thanks: 12 times
Was thanked: 34 time(s) in 22 post(s)
|
Originally Posted by: KJPark Is it possible to configure it to react on Preview/Live on Mix 2? I'm using Mix 2 as a camera switcher and the primary Preview/Live to change my layouts. For example multiview etcs.
If so, how would I do this? Thanks. This is not possible as far as I know. The Tally Subscription API is only available for the Live and Preview sources.
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 1/28/2017(UTC)
Posts: 8
Was thanked: 4 time(s) in 2 post(s)
|
Hi all,
Just let you know that I successfully built 4 tally lights using the M5Stick and 4 big 8x8 led matrices. Also built the cases and supports for everything using designs available on thingiverse.
This is so cool.
Thank you!
|
|
|
|
|
|
vMix Forums
»
General
»
3rd Party Software and Development
»
Wireless Tally Light for $10 M5Stick-C (ESP32-Board) for vMix
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The vMix Forums uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
