vMix Forums
»
General
»
General Discussion
»
vMix Audio Question, 1/2 & 3/4 over SDI and Routing Audio
Rank: Newbie
Groups: Registered
Joined: 8/16/2019(UTC) Posts: 4 ![United States United States](/Content/images/flags/US.png) Location: San Diego, CA
|
I have 4 channels of audio coming in over SDI. I want to use them all as mono channels and send two of them to the Master and Two to Bus A. Setting the Channel setting to separate mono totally breaks output on the Buses. I don't understand why. I assume this is a bug? Is there any way to customize the Audio mixer page? Here's what I got but I'm trying to figure out a better solution. The best thing I can think of is assigning everything to both left and right of their respective buses. Then opening the video input and opening audio settings when I need to adjust something. However this isn't great in the middle of a production, and I would very much like to see the input levels of different channels. Instead of one mono meter. I also can't get SetVolumeChannelMixer to work with a midi controller. It is setup like Value = Channel,Volume 0-100, Value,Input But there doesn't seem to be a way to assign a midi slider to the input. You can assign a button to and a fixed value like 50% but that is it. This seems like a problem, is this not possible? ![Input Mixer Input Mixer](https://preview.redd.it/sznps9po46751.png?width=1008&format=png&auto=webp&s=b8de7055e476b05352239ee5c6e340c5e7ee6a09) ![Input Matrix Input Matrix](https://preview.redd.it/8lbpjj0r46751.png?width=933&format=png&auto=webp&s=77f581e39613c4dfd3c3f2e9cfa96e26592e59a1) ![Problem Problem](https://preview.redd.it/bk7m3jjrn6751.png?width=958&format=png&auto=webp&s=01a339d308973739fbe61d48e6d21b3e7e5dc0b0)
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 4/23/2017(UTC) Posts: 1,142 ![Man Man](/Themes/yafpro/male.gif) Location: Germany Thanks: 3 times Was thanked: 166 time(s) in 148 post(s)
|
With the channel matrix you can select what audio is on what bus. You also can link ch3 to left and right and use another bus for just Ch4.
For the Midi controller you can use the "find" function in the shortcut settigns. If it's detected there you can use it for whatever function available in vmix.
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 8/16/2019(UTC) Posts: 4 ![United States United States](/Content/images/flags/US.png) Location: San Diego, CA
|
I understand how the matrix works that isn't the problem, it's how the application handles it. Let me know if I wasn't clear on the problem.
I also know how the find function works, that isn't the problem it's again that I can't assign a fader to value because the parameter wants a value for the first item which forces it to ignore the midi value.
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 2/23/2019(UTC) Posts: 512
Thanks: 62 times Was thanked: 119 time(s) in 108 post(s)
|
Originally Posted by: MSRENT ![Go to Quoted Post Go to Quoted Post](/Themes/yafpro/icon_latest_reply.gif) I also can't get SetVolumeChannelMixer to work with a midi controller. It is setup like Value = Channel,Volume 0-100, Value,Input
But there doesn't seem to be a way to assign a midi slider to the input. You can assign a button to and a fixed value like 50% but that is it. This seems like a problem, is this not possible?
Try +=1 or -=1 for Volume (or any increment you like instead of 1). Works with buttons, don't know about sliders.
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 8/16/2019(UTC) Posts: 4 ![United States United States](/Content/images/flags/US.png) Location: San Diego, CA
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 8/16/2019(UTC) Posts: 4 ![United States United States](/Content/images/flags/US.png) Location: San Diego, CA
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 2/23/2019(UTC) Posts: 512
Thanks: 62 times Was thanked: 119 time(s) in 108 post(s)
|
Afaik you need vMix activators to get feedback to your MIDI device, but there are no activators included for the volume levels of the channels (https://www.vmix.com/help23/index.htm?ActivatorsEdit.html). So you should be able to adjust the channel volume levels with shortcuts on sliders/buttons (I don't know what "doesn't work"), but the slider won't represent the current state of the channel's volume on your device.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/26/2020(UTC) Posts: 10 ![United States United States](/Content/images/flags/US.png) Location: Vermont Thanks: 2 times
|
Originally Posted by: MSRENT ![Go to Quoted Post Go to Quoted Post](/Themes/yafpro/icon_latest_reply.gif) the parameter wants a value for the first item which forces it to ignore the midi value. Leave the value empty?
|
|
|
|
vMix Forums
»
General
»
General Discussion
»
vMix Audio Question, 1/2 & 3/4 over SDI and Routing Audio
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The vMix Forums uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close