logo

Live Production Software Forums

www.vmix.com

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Need Help with Audio & Headphones Audio Output
Options
Go to last post Go to first unread
Previous Topic Next Topic
sinc747  
#1 Posted : Friday, June 16, 2017 2:55:44 PM(UTC)
sinc747

Rank: Advanced Member

Groups: Registered
Joined: 8/2/2013(UTC)
Posts: 1,072
Man
United States
Location: Fairhope, Alabama USA

Thanks: 553 times
Was thanked: 200 time(s) in 166 post(s)
I have run into an audio issue that I cannot figure out. Here's the scenario...

i7 PC in midtower case with Gigabyte Z270 Motherboard. Audio jacks are 1) Center/Subwoofer Speaker Out, 2) Rear Speaker Out, 3) Line In/Mic In, 4) Line Out, 5) Headphone. All drivers are up to date.

vMix 19.0.0.53 with Settings/Audio Output/Headphone assigned to the #2 Rear Speaker Out. A set of headphones are connected to that speaker jack.

But no audio can be heard in headphones attached to that speaker jack. When tested with Windows Sound, we hear a tone in the headphones so we know the jack and the headphones are working. When a different Windows Audio Device is assigned to the vMix Headphones Audio Output (the HDMI to a TV), we hear audio through that device.

But no audio to the Headphones attached to the Speaker Jack.

I feel like there's something really simple I'm missing. Any ideas? Thanks.

- Tom
Back to top
WWW

Wanna join the discussion?! Login to your vMix Forums forum account, or Register a new forum account.
Back to top  
ovinas  
#2 Posted : Friday, June 16, 2017 3:08:49 PM(UTC)
ovinas

Rank: Advanced Member

Groups: Registered
Joined: 6/4/2013(UTC)
Posts: 308
Man
Location: Germany

Thanks: 1 times
Was thanked: 57 time(s) in 49 post(s)
In Windows audio setup you have to set it to 5.1 mode. In vMix set it to the mainboard audio and try the channels 3+4 or 5+6. 1+2 should be the line out jack.

Edit: Just checked the vMix documentation and it should be on 5+6.
http://www.vmix.com/help19/AudioOutputs.html
Back to top
WWW BLOG
sinc747  
#3 Posted : Friday, June 16, 2017 9:55:29 PM(UTC)
sinc747

Rank: Advanced Member

Groups: Registered
Joined: 8/2/2013(UTC)
Posts: 1,072
Man
United States
Location: Fairhope, Alabama USA

Thanks: 553 times
Was thanked: 200 time(s) in 166 post(s)
Great idea, but did not fix our problem.

Other ideas?

- Tom
Back to top
WWW
IceStream  
#4 Posted : Saturday, June 17, 2017 10:59:51 AM(UTC)
IceStream

Rank: Advanced Member

Groups: Registered
Joined: 3/7/2012(UTC)
Posts: 2,637
Man
Location: Canada

Thanks: 33 times
Was thanked: 506 time(s) in 475 post(s)
@ sinc747

Tom, I hate to ask you this but it has to be asked...
Is the "Headphone" pot turned up in vMix?
Is it also safe to assume that the vMix audio Output is enabled in the Windows "Volume Mixer" for that output (right click windows speaker icon)?

BTW, I'm really not fond of (or at least have a hard time mastering) the windows audio interface, there are just too many windows and options to navigate IMHO.


Ice
Back to top
WWW
Len56  
#5 Posted : Saturday, June 17, 2017 11:00:23 AM(UTC)
Len56

Rank: Advanced Member

Groups: Registered
Joined: 3/30/2014(UTC)
Posts: 224
Man
United Kingdom
Location: London, UK

Thanks: 23 times
Was thanked: 27 time(s) in 23 post(s)
Close vMix, go into the sound control panel and select your sound card, in the playback tab and click on properties, click on the levels tab and make sure all the levels are turned up then re-open vMix to see if all the sound is working.
Back to top
sinc747  
#6 Posted : Saturday, June 17, 2017 5:19:27 PM(UTC)
sinc747

Rank: Advanced Member

Groups: Registered
Joined: 8/2/2013(UTC)
Posts: 1,072
Man
United States
Location: Fairhope, Alabama USA

Thanks: 553 times
Was thanked: 200 time(s) in 166 post(s)
Len56 wrote:
Close vMix, go into the sound control panel and select your sound card, in the playback tab and click on properties, click on the levels tab and make sure all the levels are turned up then re-open vMix to see if all the sound is working.


Thanks. Tried that already. :(
Back to top
WWW
sinc747  
#7 Posted : Saturday, June 17, 2017 5:20:31 PM(UTC)
sinc747

Rank: Advanced Member

Groups: Registered
Joined: 8/2/2013(UTC)
Posts: 1,072
Man
United States
Location: Fairhope, Alabama USA

Thanks: 553 times
Was thanked: 200 time(s) in 166 post(s)
IceStream wrote:
Is the "Headphone" pot turned up in vMix?


Yep. :(

But I hear you. It's got to be something simple like that.

Tom
Back to top
WWW
sinc747  
#8 Posted : Saturday, June 17, 2017 5:42:18 PM(UTC)
sinc747

Rank: Advanced Member

Groups: Registered
Joined: 8/2/2013(UTC)
Posts: 1,072
Man
United States
Location: Fairhope, Alabama USA

Thanks: 553 times
Was thanked: 200 time(s) in 166 post(s)
IceStream wrote:
Is it also safe to assume that the vMix audio Output is enabled in the Windows "Volume Mixer" for that output (right click windows speaker icon)?


Hmm. Checking on that. Good thought.

- Tom
Back to top
WWW
mjgraves  
#9 Posted : Saturday, June 17, 2017 10:36:39 PM(UTC)
mjgraves

Rank: Advanced Member

Groups: Registered
Joined: 7/1/2015(UTC)
Posts: 1,151
Man
United States
Location: Houston TX

Thanks: 319 times
Was thanked: 263 time(s) in 233 post(s)
Tom,

This may not be what you're after, but it's something that I can offer from experience. All-in-one solutions are seldom best in class in all their various facets. I use vMix audio in parallel with VoiceMeeter, to deliver a more capable audio solution. This is largely driven by the fact that I use video conference tools that demand bidirectional audio everywhere. Audio handling in vMix is rudimentary.

By using virtual audio devices I find that I can pass audio back and forth between difference sources/destinations on the same PC.

The trick is to reserve the Windows default playback device as purely a monitoring tap.

In a past life this was like the facility router, or the jack field beside the mixing console.

I haven't yet experimented with DANTE, but I'd like to. That would extend the arrangement to accommodate signals to/from network sources.

Michael
Back to top
WWW BLOG
kjones9999  
#10 Posted : Sunday, June 18, 2017 11:36:39 AM(UTC)
kjones9999

Rank: Advanced Member

Groups: Registered
Joined: 8/20/2014(UTC)
Posts: 388

Thanks: 29 times
Was thanked: 80 time(s) in 51 post(s)
ANy change if you select default playback device? (Assuming you have this jack set as default playback).
Back to top
kjones9999  
#11 Posted : Sunday, June 18, 2017 11:37:41 AM(UTC)
kjones9999

Rank: Advanced Member

Groups: Registered
Joined: 8/20/2014(UTC)
Posts: 388

Thanks: 29 times
Was thanked: 80 time(s) in 51 post(s)
Oh and these problems happen all the time with VAC. Are you using that?
Back to top
sinc747  
#12 Posted : Tuesday, June 20, 2017 12:29:17 PM(UTC)
sinc747

Rank: Advanced Member

Groups: Registered
Joined: 8/2/2013(UTC)
Posts: 1,072
Man
United States
Location: Fairhope, Alabama USA

Thanks: 553 times
Was thanked: 200 time(s) in 166 post(s)
sinc747 wrote:
IceStream wrote:
Is it also safe to assume that the vMix audio Output is enabled in the Windows "Volume Mixer" for that output (right click windows speaker icon)?


Hmm. Checking on that. Good thought.

- Tom

We have a winner! Thanks, Ice. Sometimes it really is the simple stuff!

- Tom
Back to top
WWW
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.154 seconds.