vMix Forums
»
General
»
Showcase
»
Drone live in vmix
Rank: Advanced Member
Groups: Registered
Joined: 12/19/2013(UTC) Posts: 600   Location: Belgium Thanks: 75 times
Was thanked: 91 time(s) in 75 post(s)
|
On the Cirque Magique festival we tried to feed a drone live into our production: https://www.facebook.com...videos/1895526240670661/We used an amimon connex on the drone and connected to the ground station via 80 meter sdi cable. The amimon connex had some trouble with connection, but overall it had a nice result. Since the drone crew was actually shooting the aftermovie, we could only use 5 minutes of their battery ad time, next time we hire them especially for us :)
|
 2 users thanked Ittaidv for this useful post.
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 5/24/2015(UTC)
Posts: 370
Location: Netherlands
Thanks: 16 times
Was thanked: 81 time(s) in 72 post(s)
|
Nice, only the round tent of course blocked what you would want to get of the shots. Or they should take it up much higher, which I expect they did for the aftermovie. ;)
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 10/7/2015(UTC)
Posts: 635
Location: California
Thanks: 122 times
Was thanked: 123 time(s) in 115 post(s)
|
@Ittaidv
I like your ingenuity! Cool!
|
|
|
|
|
|
Rank: Advanced Member
Groups:
Joined: 1/17/2016(UTC)
Posts: 142
Location: Nj
Was thanked: 7 time(s) in 7 post(s)
|
How did u get the drone in vmix? Wireless hdmi?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 7/18/2014(UTC)
Posts: 84
Was thanked: 10 time(s) in 8 post(s)
|
Digitalson wrote:How did u get the drone in vmix? Wireless hdmi? I actually just did a vMix production last weekend and I had a DJI Inspire 1 into vMix. It was pretty simple, I took the HDMI output off the controller, then converted it to SDI using a very cheap HDMI to SDI converter, then the SDI signal went straight into my Decklink Quad2 which was a source. Nothing overly complex or difficult and it worked great. Here is a picture of my setup with the drone on preview. https://drive.google.com...71za2Mw/view?usp=sharing
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 4/13/2015(UTC)
Posts: 59
Thanks: 45 times
Was thanked: 3 time(s) in 3 post(s)
|
curtismacd31 wrote:Digitalson wrote:How did u get the drone in vmix? Wireless hdmi? I actually just did a vMix production last weekend and I had a DJI Inspire 1 into vMix. It was pretty simple, I took the HDMI output off the controller, then converted it to SDI using a very cheap HDMI to SDI converter, then the SDI signal went straight into my Decklink Quad2 which was a source. Nothing overly complex or difficult and it worked great. Here is a picture of my setup with the drone on preview. https://drive.google.com...71za2Mw/view?usp=sharing Curtis, can you share a link to what converter you used? Thanks
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 7/18/2014(UTC)
Posts: 84
Was thanked: 10 time(s) in 8 post(s)
|
al4video wrote:
Curtis, can you share a link to what converter you used?
This is the one I use. https://www.amazon.ca/ni...amp;keywords=HDMI+to+SDII have also used the Decimator MD-HX, It works really well when you need to convert your signal for a switcher that does not accept different frame rates/resolutions (like the ATEM line of switchers). Curtis
|
|
|
|
|
|
vMix Forums
»
General
»
Showcase
»
Drone live in vmix
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The vMix Forums uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
