Oscar,

Can you please drop an email to info@vmix.com.au as it is quite odd that none of these cards show up in the list
as we use the new Magewell SDK in 18 which should detect all of them.

Thanks,

Martin
vMix

Bunch of updates and fixes just added to 18.0.0.58. See below for more info:
http://forums.vmix.com/d...ts&m=31945#post31945

Updated to vmix 18 and no longer have my Black magic decklink card working in vmix. I know the card and drivers are not at fault as they still work in wirecast and black magic media express.

I have tried all legacy options and still have no video coming in from the card in vmix 18. Everything was fine in vmix 17, can I downgrade my update?

Same thing here with Intensity Shuttle USB3. Have had to reinstall earlier version of vMix. I chose to drop back to v 16

There have been no changes to Decklink functionality in vMix 18 other than to hide the legacy devices that tended to cause problems for most users.
Only thing I can think of is the video format selected for the camera may have changed when upgrading versions, so double check the frame rate exactly
matches what the camera is sending, paying particular attention to if it is interlaced or not.

Failing that please drop us an email at info@vmix.com.au

Thanks,

Martin
vMix

Works fine here, how are the files numbered?

Could you zip them up and email them to us? Must be something not quite right with the numbering.

Thanks Martin! That was it! I swear I had that working in previous releases as it was.

@ mburel1980

AFAIK, internal 'Recording' and 'Streaming' use the same feed in vMix (Recording/External => Output/Preview/MultiView/ or Input).
If you want to Stream 'Program Out' but record a "clean" feed sans Overlay, you may need to record externally from either the "Fullscreen" or "External 2" feeds if you have that capability.
The "MultiCorder" feature will also record individual Camera Inputs independently of "Program Out" but that is probably not what you want.


Ice

I did my first sports productions with version 18.0.0.59.

Changes:
Instant Replay - new features added to Instant Replay include 8 Event tabs, up from four, 3 digit ID codes assigned to each event and the order events irrespective of timecode.

Also one change from 17 to 18 regarding Instant Replay was, that the progress bar shows the total duration of the selected events and camera angles. I like this change a lot and it makes operation easier.

But now, like it is implemented, I have the opposite problem: I don't see anymore (like in 17) the duration/progress bar of each camera angle. I decided with this information if vMix should go to the next event for itself or I should force vMix to go to the next angle manually (because the out mark is to far away). Now, if I press "next angle" at the wrong moment (almost the same time as vMix would switch), vMix jumps over one angle.

Possible solution:
Above the overall progress bar, a small progress bar in another color (height only a few pixels), which shows the duration of the current angle. There is no time information required, only the progress bar. With this solution, we can address both needs.

Regards,
Patrick