logo

Live Production Software Forums

www.vmix.com

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Overlay only shown on Output 1
Options
Go to last post Go to first unread
Previous Topic Next Topic
H.Petersen  
#1 Posted : Tuesday, April 16, 2024 2:44:30 AM(UTC)
H.Petersen

Rank: Newbie

Groups: Registered
Joined: 3/11/2023(UTC)
Posts: 3
Germany
Hello,
I've just set up a show with 4 external outputs (27.0.0.69) and found out,
that my lower thirds on overlay 1 are only shown on output 1.
I rechecked it on all overlay-channels, but it is the same.
All overlays and stingers are enabled on every output, but not shown on
2, 3 and 4. Can you guys please check that?
Back to top

Wanna join the discussion?! Login to your vMix Forums forum account, or Register a new forum account.
Back to top  
doggy  
#2 Posted : Tuesday, April 16, 2024 6:49:04 AM(UTC)
doggy

Rank: Advanced Member

Groups: Registered
Joined: 12/27/2012(UTC)
Posts: 5,085
Belgium
Location: Belgium

Thanks: 284 times
Was thanked: 920 time(s) in 759 post(s)
Originally Posted by: H.Petersen Go to Quoted Post
Hello,
I've just set up a show with 4 external outputs (27.0.0.69) and found out,
that my lower thirds on overlay 1 are only shown on output 1.
I rechecked it on all overlay-channels, but it is the same.
All overlays and stingers are enabled on every output, but not shown on
2, 3 and 4. Can you guys please check that?


Screenshot 2024-04-15 224801.jpg (55kb) downloaded 0 time(s).
Back to top
H.Petersen  
#3 Posted : Tuesday, April 16, 2024 6:51:22 AM(UTC)
H.Petersen

Rank: Newbie

Groups: Registered
Joined: 3/11/2023(UTC)
Posts: 3
Germany
As i wrote, all overlays and stingers are activated on all outputs :)
Back to top
doggy  
#4 Posted : Tuesday, April 16, 2024 6:56:38 AM(UTC)
doggy

Rank: Advanced Member

Groups: Registered
Joined: 12/27/2012(UTC)
Posts: 5,085
Belgium
Location: Belgium

Thanks: 284 times
Was thanked: 920 time(s) in 759 post(s)
Originally Posted by: H.Petersen Go to Quoted Post
As i wrote, all overlays and stingers are activated on all outputs :)


OK, sorry
Have you tried with updating to the latest version (.72)?
Back to top
H.Petersen  
#5 Posted : Tuesday, April 16, 2024 7:00:05 AM(UTC)
H.Petersen

Rank: Newbie

Groups: Registered
Joined: 3/11/2023(UTC)
Posts: 3
Germany
No, we are right now on production, starting tomorrow. I think i will try the .72 right after that.
Thank you.
Back to top
dmwkr  
#6 Posted : Wednesday, April 17, 2024 8:50:37 AM(UTC)
dmwkr

Rank: Advanced Member

Groups: Registered
Joined: 2/23/2019(UTC)
Posts: 515

Thanks: 62 times
Was thanked: 119 time(s) in 108 post(s)
Are you sending "Output" to Outputs 2, 3, 4? Or specific Inputs?
Back to top
Salvatore  
#7 Posted : Wednesday, April 17, 2024 4:23:15 PM(UTC)
Salvatore

Rank: Advanced Member

Groups: Registered
Joined: 11/15/2021(UTC)
Posts: 67
Italy

Thanks: 7 times
Was thanked: 8 time(s) in 6 post(s)
if you look at doggy's picture, the overlays in his example only work on Output 1,2 and 3.
These are set to „Output“.

Output 4 is Set to Input10. Overlays are don't possible here because vmix only sends overlays to the „main mix“ (PGM)
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.124 seconds.