Rank: Newbie
Groups: Registered
Joined: 11/5/2023(UTC) Posts: 8  Location: Los Angeles Was thanked: 1 time(s) in 1 post(s)
|
Hi There- I'm still trying to figure out the logic behind the triggers. Please see pic below. When Overlay Channel 2 is turned off, I would think the next command to wipe to color bars would occur 1000ms following the previous Channel 2 overlay command but it does nothing. If, however I change the last command to "On Completion" it operates as expected. I even tried setting the Wipe trigger to "On Overlay Out" thinking that the previous command turning off the overlay would properly trigger the wipe but no luck. I've even tried loading bars into preview and having it wipe to what is loaded into preview no luck. As a test, I can run the clip and then manually hit the wipe button and it behaves as expected. When I duplicate the triggers for a static input, ie, another input i've set to bars, the triggers operate as expected. It seems to be tied to a clip that is currently playing. I've worked in network television for 20 years (not using VMix) and I cannot seem to figure out the operating logic to save my life lol. Thanks in advance! Matt  Capture.PNG (161kb) downloaded 2 time(s).
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 12/27/2012(UTC) Posts: 5,244  Location: Belgium Thanks: 294 times
Was thanked: 961 time(s) in 795 post(s)
|
Originally Posted by: mattford1  Hi There-
I'm still trying to figure out the logic behind the triggers. Please see pic below.
When Overlay Channel 2 is turned off, I would think the next command to wipe to color bars would occur 1000ms following the previous Channel 2 overlay command but it does nothing. If, however I change the last command to "On Completion" it operates as expected. I even tried setting the Wipe trigger to "On Overlay Out" thinking that the previous command turning off the overlay would properly trigger the wipe but no luck.
I've even tried loading bars into preview and having it wipe to what is loaded into preview no luck.
As a test, I can run the clip and then manually hit the wipe button and it behaves as expected.
When I duplicate the triggers for a static input, ie, another input i've set to bars, the triggers operate as expected. It seems to be tied to a clip that is currently playing.
I've worked in network television for 20 years (not using VMix) and I cannot seem to figure out the operating logic to save my life lol.
Thanks in advance!
Matt
Looking for an answer to then delete your post ? (see part1 https://forums.vmix.com/...Mix-Triggers#post111201)
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 11/5/2023(UTC) Posts: 8 Location: Los Angeles Was thanked: 1 time(s) in 1 post(s)
|
will check it out. Thank you!
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 11/23/2020(UTC) Posts: 170 Location: Wichita Thanks: 10 times
Was thanked: 24 time(s) in 20 post(s)
|
Think of ALL those OnTransitionIn triggers as happening in parallel. All those delays are counted against the moment the OnTransitionIn event happens, not after the trigger just before it in the list occurs.
So you need to add the 4661 ms from the OverlayInput2In trigger to the 3000 ms before the OverlayInput2Out starts. Add another 500ms for the "Duration" if you are required to have the overlay to be fully present for 3 seconds since it may depend on the chosen transition.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 2/23/2019(UTC)
Posts: 561
Thanks: 62 times
Was thanked: 131 time(s) in 119 post(s)
|
Originally Posted by: Roy Sinclair
Think of ALL those OnTransitionIn triggers as happening in parallel. All those delays are counted against the moment the OnTransitionIn event happens, not after the trigger just before it in the list occurs.
So you need to add the 4661 ms from the OverlayInput2In trigger to the 3000 ms before the OverlayInput2Out starts. Add another 500ms for the "Duration" if you are required to have the overlay to be fully present for 3 seconds since it may depend on the chosen transition.
Roy, I don't think that's true. See delay section in the helpfiles. https://www.vmix.com/help26/Triggers.html@mattford1: Also in the helpfiles: "Note that in order to prevent loops, transition effects have no effect for OnTransitionIn or OnTransitionOut." That is why your wipe doesn't work.
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The vMix Forums uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
