logo

Live Production Software Forums


Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Plamen  
#1 Posted : Monday, June 29, 2020 5:17:14 AM(UTC)
Plamen

Rank: Member

Groups: Registered
Joined: 12/14/2019(UTC)
Posts: 23
United States
Location: Atlanta

Hello all,

I'm testing out sending SRT feeds to a Nimble server in the cloud and am noticing severe artifacts of the image when I get the return feed. Research tells me that this is caused by the bitrate at certain points of the stream being much lower than the Constant Bitrate being encoded and buffers would help alleviate this. Are there any options/settings/parameters in vmix that might help to reduce this issue?

SRT Settings:
- Type: Caller
- Latency: 160ms (RTT=30ms)
- Quality: H264 15mbps AAC 128kbps (high bitrate needed for quality recording in nimble)
- Hardware Encoder: OFF

Here is an example of what I'm talking about:
SRT Artifacts

Thanks in advance!
ask  
#2 Posted : Monday, June 29, 2020 6:54:00 AM(UTC)
ask

Rank: Advanced Member

Groups: Registered
Joined: 10/13/2012(UTC)
Posts: 1,161
Australia
Location: Melbourne

Thanks: 220 times
Was thanked: 199 time(s) in 181 post(s)
As a test lower your bitrate to say 3.5mbps
admin  
#3 Posted : Monday, June 29, 2020 12:35:58 PM(UTC)
admin

Rank: Administration

Groups: Administrators
Joined: 1/13/2010(UTC)
Posts: 5,137
Man
Location: Gold Coast, Australia

Was thanked: 4135 time(s) in 1487 post(s)
This is due to packet loss due to insufficient latency configured on the SRT stream, so that value will need to be increased
until the issue is fixed.

Regards,

Martin
vMix
thanks 1 user thanked admin for this useful post.
eduardocfs on 7/1/2020(UTC)
PaulProd  
#4 Posted : Sunday, November 28, 2021 2:53:39 AM(UTC)
PaulProd

Rank: Newbie

Groups: Registered
Joined: 11/28/2021(UTC)
Posts: 1
Spain
Location: Barcelona

Hey Martin,

I've changed the latency configuration but I'm still getting artifacts when the image is still.

Do you know why ?

Thanks in advance!
LSC1759  
#5 Posted : Friday, September 2, 2022 8:56:08 AM(UTC)
LSC1759

Rank: Newbie

Groups: Registered
Joined: 5/18/2022(UTC)
Posts: 1
Georgia
Location: Tbilisi

Same exact issue. only happens when the frame is still. Increasing latency didn't help. Also, it only happened over 4G with 20-30ms in SRT stats.
kevev  
#6 Posted : Tuesday, November 15, 2022 4:29:44 PM(UTC)
kevev

Rank: Advanced Member

Groups: Registered
Joined: 1/14/2018(UTC)
Posts: 153
Location: Texas

Thanks: 6 times
Was thanked: 9 time(s) in 5 post(s)
I see the same issue. We start our broadcasts with a static bumper image. No issues once there is motion in the video.
marccolemont  
#7 Posted : Friday, November 18, 2022 11:34:46 PM(UTC)
marccolemont

Rank: Newbie

Groups: Registered
Joined: 11/18/2022(UTC)
Posts: 1
Belgium
Location: Hasselt

I still see this all the time sending SRT to and from vMIX.
When I look in the Haivision SRT Gateway, the vMix is sending VBR SRT stream, even if we set 2000ms delay, it still happens.
Graphics in SRT Gateway show perfect internet connection and no dropped frames or resending data packets.
Can't find a setting to set at CBR for the SRT, only keyframes can be set?
gostreamworks  
#8 Posted : Tuesday, December 6, 2022 11:27:47 PM(UTC)
gostreamworks

Rank: Member

Groups: Registered
Joined: 9/21/2018(UTC)
Posts: 19
Location: United Arab Emirates

Thanks: 1 times
hi +1 for CBR for SRT. We need network CBR to have SRT work properly with Brightcove. We see really bad artifacting when we make hard cuts.
kevev  
#9 Posted : Wednesday, December 7, 2022 1:34:19 AM(UTC)
kevev

Rank: Advanced Member

Groups: Registered
Joined: 1/14/2018(UTC)
Posts: 153
Location: Texas

Thanks: 6 times
Was thanked: 9 time(s) in 5 post(s)
Try the free SRTStreamer app. It will take NDI out from vMix and push SRT.

https://srtminiserver.com/free-tools#srtstreamer
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.