logo

Live Production Software Forums

www.vmix.com

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Birddog P100 tally
Options
Go to last post Go to first unread
Previous Topic Next Topic
Timmy-o  
#1 Posted : Tuesday, July 19, 2022 1:54:12 PM(UTC)
Timmy-o

Rank: Newbie

Groups: Registered
Joined: 7/19/2022(UTC)
Posts: 3
New Zealand
Hi, new to V-Mix and working with a couple of Birddog P100s.
Just wondering if there's a way to get the tally lights working on them? I get a tally indicator bar in NDI Studio when I switch, so the signal is there, and (using Sony VISCA over IP) I can use all the PTZ functions, but the lights don't indicate status on the camera itself (I gather the camera's 2 front LED lights should go green-red, but just one shows permanently green).
Is there a trick in V-Mix to get this to happen, or not possible with this camera?

Thanks!
Back to top

Wanna join the discussion?! Login to your vMix Forums forum account, or Register a new forum account.
Back to top  
mavik  
#2 Posted : Thursday, July 21, 2022 12:06:41 AM(UTC)
mavik

Rank: Advanced Member

Groups: Registered
Joined: 4/23/2017(UTC)
Posts: 1,211
Man
Location: Germany

Thanks: 3 times
Was thanked: 168 time(s) in 150 post(s)
Open the cam UI (right click on the source -> configure source), browse to the AV Setup section on the left. In the encode settings you see an onboard tally that needs to be set to on.
Back to top
WWW
doggy  
#3 Posted : Thursday, July 21, 2022 12:40:06 AM(UTC)
doggy

Rank: Advanced Member

Groups: Registered
Joined: 12/27/2012(UTC)
Posts: 5,216
Belgium
Location: Belgium

Thanks: 291 times
Was thanked: 955 time(s) in 790 post(s)
Might be worth mentioning what firmware the camera is on .
They have recently released the general NDI5 beta fw and (for some cams) there are still some bugs there . For one this FW on an PF120 fails to keep its on cam Tally settings
Back to top
mavik  
#4 Posted : Thursday, July 21, 2022 2:32:09 AM(UTC)
mavik

Rank: Advanced Member

Groups: Registered
Joined: 4/23/2017(UTC)
Posts: 1,211
Man
Location: Germany

Thanks: 3 times
Was thanked: 168 time(s) in 150 post(s)
Yes, sorry. I'm on the beta already with my P200's. I did extensive tests the past days and I have no issues.
Back to top
WWW
doggy  
#5 Posted : Thursday, July 21, 2022 2:34:15 AM(UTC)
doggy

Rank: Advanced Member

Groups: Registered
Joined: 12/27/2012(UTC)
Posts: 5,216
Belgium
Location: Belgium

Thanks: 291 times
Was thanked: 955 time(s) in 790 post(s)
Originally Posted by: mavik Go to Quoted Post
Yes, sorry. I'm on the beta already with my P200's. I did extensive tests the past days and I have no issues.


Will be FP120 specific then (others have mentioned the issue too)
Back to top
Timmy-o  
#6 Posted : Thursday, July 21, 2022 7:18:17 AM(UTC)
Timmy-o

Rank: Newbie

Groups: Registered
Joined: 7/19/2022(UTC)
Posts: 3
New Zealand
Thanks @mavik and @doggy
When I click configure source it opens my web browser to the birddog web UI (I assume that's correct), but I have a menu that runs along the top, with A/V towards the right side of the screen and no 'Tally' option under encode settings.
I'm running birddog firmware 4.5.3790-LTS, but it's also a P100 so not sure if it actually supports NDI5? (so also maybe didn't get that firmware)
Back to top
doggy  
#7 Posted : Thursday, July 21, 2022 8:12:21 AM(UTC)
doggy

Rank: Advanced Member

Groups: Registered
Joined: 12/27/2012(UTC)
Posts: 5,216
Belgium
Location: Belgium

Thanks: 291 times
Was thanked: 955 time(s) in 790 post(s)
Originally Posted by: Timmy-o Go to Quoted Post
Thanks @mavik and @doggy
When I click configure source it opens my web browser to the birddog web UI (I assume that's correct), but I have a menu that runs along the top, with A/V towards the right side of the screen and no 'Tally' option under encode settings.
I'm running birddog firmware 4.5.3790-LTS, but it's also a P100 so not sure if it actually supports NDI5? (so also maybe didn't get that firmware)


https://birddog.tv/downloads/
Back to top
Timmy-o  
#8 Posted : Thursday, July 21, 2022 8:36:06 AM(UTC)
Timmy-o

Rank: Newbie

Groups: Registered
Joined: 7/19/2022(UTC)
Posts: 3
New Zealand
Yep, that's where I got the firmware from. It appears to be the current/latest available for my camera
Back to top
mavik  
#9 Posted : Thursday, July 21, 2022 3:01:14 PM(UTC)
mavik

Rank: Advanced Member

Groups: Registered
Joined: 4/23/2017(UTC)
Posts: 1,211
Man
Location: Germany

Thanks: 3 times
Was thanked: 168 time(s) in 150 post(s)
I can check my BD studios where the setting is when I get into the office again. They are not updated yet.
The beta is also available for the P100. You might want to try that as well.
The beta to me looks more be in beta in regards to the freeD support.
Back to top
WWW
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.109 seconds.