logo

Live Production Software Forums

www.vmix.com

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
BirdDog p120 ptz presets that zoom - Presets that require significant zoom are zooming only a small fraction
Options
Go to last post Go to first unread
Previous Topic Next Topic
foccmedia  
#1 Posted : Sunday, March 19, 2023 4:48:25 AM(UTC)
foccmedia

Rank: Newbie

Groups: Registered
Joined: 3/19/2023(UTC)
Posts: 2
United States
We purchased a new Birddog p120, our first and only ptz camera, with the intention of using vmix to control the movement. We've upgraded the firmware on the camera and updated vMix to 26.0.0.40. The camera is setup as an NDI source with Sony VISCA over IP controls.

Everything works well except for the zooming presets. We've set up the presets by using the vMix ptz manual setup.

The preset panning and tilting work fine. The zooming is not working. It may move only a fraction of the way.

We're not sure what the problem is.

Anybody seen this in your setup?

Thanks.

FOCC
Back to top

Wanna join the discussion?! Login to your vMix Forums forum account, or Register a new forum account.
Back to top  
lhtech  
#2 Posted : Tuesday, March 28, 2023 1:35:28 AM(UTC)
lhtech

Rank: Newbie

Groups: Registered
Joined: 3/28/2023(UTC)
Posts: 2
United States
Have noticed that the slider to the right of Zoom doesn't work on my Panasonic PTZs, however the +/- buttons do. Is this also the case for your BD cams?
Back to top
foccmedia  
#3 Posted : Tuesday, March 28, 2023 2:34:04 AM(UTC)
foccmedia

Rank: Newbie

Groups: Registered
Joined: 3/19/2023(UTC)
Posts: 2
United States
I think that slider is for the manual zoom movement speed. When I move it to the lowest position, manual zooming is slow. The opposite is true for the highest. It doesn't seem to impact movement between presets though.
Back to top
ATXLarry  
#4 Posted : Thursday, November 2, 2023 11:31:28 AM(UTC)
ATXLarry

Rank: Newbie

Groups: Registered
Joined: 11/2/2023(UTC)
Posts: 2
United States
Location: Texas
I am having the same issue with 2 Birddog P400 cameras running in 26.0.0.45 vMix, using POE and the Sony VISCA over IP control. Pan and tilt information are saving perfectly in the new virtual outputs I create but none of the zoom settings are captured. I can't tell if this is a vMix issue or a birddog issue.
I have read prior posts with this issue but the answers all relate to firmware and the posts are from 2021.

I am open to anyone who has a suggestion for what step I am missing.

Thanks
Back to top
WWW
ATXLarry  
#5 Posted : Saturday, November 4, 2023 3:58:58 AM(UTC)
ATXLarry

Rank: Newbie

Groups: Registered
Joined: 11/2/2023(UTC)
Posts: 2
United States
Location: Texas
Looks like the NDI 5 firmware update will fix this in the future. So I will be updating cameras next week.
Back to top
WWW
fgolman  
#6 Posted : Sunday, November 5, 2023 8:01:44 AM(UTC)
fgolman

Rank: Advanced Member

Groups: Registered
Joined: 3/30/2023(UTC)
Posts: 85
United States
Location: Chicago

Thanks: 8 times
Was thanked: 3 time(s) in 2 post(s)
.94 is the official latest firmware version as of this date. You also might want to reach out to Birddog as the beta now has NDI HX, SRT and RTMP, too (it's pretty slick). It's likely to become an official release soon, too!
Back to top
JessShake  
#7 Posted : Sunday, October 20, 2024 3:03:12 AM(UTC)
JessShake

Rank: Member

Groups: Registered
Joined: 2/9/2021(UTC)
Posts: 16
United States
Location: Oklahoma

Thanks: 2 times
Was thanked: 1 time(s) in 1 post(s)
Have you resolved this? I'm looking at some of the newer Birddog cameras, but ptz control from VMix is a must have.
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.089 seconds.