logo

Live Production Software Forums

www.vmix.com

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Remove lower-3rd on video input, and return it when back to live camera
Options
Go to last post Go to first unread
Previous Topic Next Topic
themann00  
#1 Posted : Friday, May 17, 2019 10:26:07 PM(UTC)
themann00

Rank: Advanced Member

Groups: Registered
Joined: 5/1/2019(UTC)
Posts: 34
United States
Location: Indianapolis

Thanks: 4 times
I feel like this should be straight forward- and I've got the first half down... but can't seem to get my lower-3rd back after going back to any other source.
The #4 button in the center panel lights up, but nothing is on the screen. I have to go back to the Lower-3rd input and fire it again from there.

Here's what I set in my triggers for the video file

Quote:
Trigger-----------Function------------Input--------Duration------Delay
OnTransitionIn OverlayInput4Out Preview 500
OnTransitionOut OverlayInput4In Preview 500
Back to top
WWW

Wanna join the discussion?! Login to your vMix Forums forum account, or Register a new forum account.
Back to top  
themann00  
#2 Posted : Friday, May 17, 2019 10:29:14 PM(UTC)
themann00

Rank: Advanced Member

Groups: Registered
Joined: 5/1/2019(UTC)
Posts: 34
United States
Location: Indianapolis

Thanks: 4 times
Sorry, that didn't format very well- the way it did in the preview.
Back to top
WWW
elgarf  
#3 Posted : Friday, May 17, 2019 10:32:41 PM(UTC)
elgarf

Rank: Advanced Member

Groups: Registered
Joined: 10/23/2015(UTC)
Posts: 458
Man
Russian Federation

Thanks: 20 times
Was thanked: 225 time(s) in 129 post(s)
@themann00, you need your preview bus to be overlay?
I think it should look like:
Quote:
Trigger-----------Function------------Input--------Duration------Delay
OnTransitionIn OverlayInput4In SomeInput 500
OnTransitionOut OverlayInput4Out Preview 500
Back to top
BLOG
themann00  
#4 Posted : Friday, May 17, 2019 10:55:03 PM(UTC)
themann00

Rank: Advanced Member

Groups: Registered
Joined: 5/1/2019(UTC)
Posts: 34
United States
Location: Indianapolis

Thanks: 4 times
I'm not entirely sure what the input field is for, so I left it as default. I might be going about this the wrong way...

My goal is to move from any of many potential live camera inputs with a lower 3rd to a pre-recorded video- and the lower-3rd disappears. When the video ends, I want to go back to any of the live cameras, and have the previous used lower-3rd restored.

To further complicate it, there are 5 different lower thirds used throughout the broadcast... So I can't easily plan for exactly which lower-3rd or which input will be used in each scenario.

Originally Posted by: elgarf Go to Quoted Post
@themann00, you need your preview bus to be overlay?
I think it should look like:
Quote:
Trigger-----------Function------------Input--------Duration------Delay
OnTransitionIn OverlayInput4In SomeInput 500
OnTransitionOut OverlayInput4Out Preview 500
Back to top
WWW
themann00  
#5 Posted : Friday, May 17, 2019 10:56:27 PM(UTC)
themann00

Rank: Advanced Member

Groups: Registered
Joined: 5/1/2019(UTC)
Posts: 34
United States
Location: Indianapolis

Thanks: 4 times
Another way to think of it - I have 3 pre-recorded broll clips and a few full screen graphics I would like to pull up, and have it go ON TOP of any turned on overlays.

Is that an option somewhere?
Back to top
WWW
Joeboe  
#6 Posted : Saturday, May 18, 2019 12:21:18 AM(UTC)
Joeboe

Rank: Advanced Member

Groups: Registered
Joined: 4/16/2017(UTC)
Posts: 578
Location: jamaica

Thanks: 77 times
Was thanked: 32 time(s) in 31 post(s)
I was looking at your trigger commands, but you will have to identify which overlay goes with which input....You only have a choice of 4 overlays, so if you have 3 cameras, just set the overlay trigger for each camera (overlay 1, overlay 2, overlay 3), but you will have to use the same camera shot each time, so as not to have the wrong overlay on....otherwise you will have to trigger the overlays manually....


**I'm not entirely sure what the input field is for, so I left it as default. I might be going about this the wrong way......** This is for you to select the input you want for the overlay. Where the word "Preview", click on the down arrow, and make your selection from the drop down menu....then click add...you can have as many triggers as you want, just know what you want to do...

NB: You only have a choice of 4 overlay channels, so you will have to trigger some manually....
Back to top
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.100 seconds.