logo

Live Production Software Forums

www.vmix.com

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Balanced XLR ----> Line In Audio on PC best way?
Options
Go to last post Go to first unread
Previous Topic Next Topic
brianshupe  
#1 Posted : Thursday, August 3, 2017 7:05:02 PM(UTC)
brianshupe

Rank: Newbie

Groups: Registered
Joined: 5/3/2017(UTC)
Posts: 9
Location: Baltimore
Here is my setup....

x32 soundboard XLR L & R out

need to get it into my PC

Currently using XLR turnarounds (female to female adapters) to a XLR/XLR to 1/8 TRS cable.

I get electronic noise very low level not a clean signal.


Is there a good product to get xlr into my PC?
If I use a A/D interface will I be able to use it as an audio source?

Is the an xlr compatible sound card? maybe with a breakout dongle or something?

any ideas? lessons learned? experience gained?

love some help. this is for live music recording
Back to top
WWW

Wanna join the discussion?! Login to your vMix Forums forum account, or Register a new forum account.
Back to top  
desmar  
#2 Posted : Thursday, August 3, 2017 8:50:21 PM(UTC)
desmar

Rank: Advanced Member

Groups: Registered
Joined: 8/21/2015(UTC)
Posts: 324
Man
Canada
Location: Cornwall, Ontario, Canada

Thanks: 18 times
Was thanked: 80 time(s) in 60 post(s)
Behringer x32 has USB built in.

Just Install ASIO Driver and plug in USB cable from mixer to computer.

Then Add audio Input.. and select x32.



brianshupe wrote:
Here is my setup....

x32 soundboard XLR L & R out

need to get it into my PC

Currently using XLR turnarounds (female to female adapters) to a XLR/XLR to 1/8 TRS cable.

I get electronic noise very low level not a clean signal.


Is there a good product to get xlr into my PC?
If I use a A/D interface will I be able to use it as an audio source?

Is the an xlr compatible sound card? maybe with a breakout dongle or something?

any ideas? lessons learned? experience gained?

love some help. this is for live music recording
Back to top
David-NBC  
#3 Posted : Friday, August 4, 2017 1:49:34 PM(UTC)
David-NBC

Rank: Member

Groups: Registered
Joined: 5/3/2016(UTC)
Posts: 28
Location: United Kingdom

Thanks: 4 times
brianshupe wrote:
Here is my setup....

x32 soundboard XLR L & R out

need to get it into my PC

Currently using XLR turnarounds (female to female adapters) to a XLR/XLR to 1/8 TRS cable.

I get electronic noise very low level not a clean signal.


Is there a good product to get xlr into my PC?
If I use a A/D interface will I be able to use it as an audio source?

Is the an xlr compatible sound card? maybe with a breakout dongle or something?

any ideas? lessons learned? experience gained?

love some help. this is for live music recording


The "electronic noise very low level" is caused by earth path, you need a Audio isolation transformer.
Back to top
WWW
DWAM  
#4 Posted : Friday, August 4, 2017 2:20:01 PM(UTC)
DWAM

Rank: Advanced Member

Groups: Registered
Joined: 3/20/2014(UTC)
Posts: 2,721
Man
France
Location: Bordeaux, France

Thanks: 243 times
Was thanked: 794 time(s) in 589 post(s)
Check DI boxes to avoid noise
Back to top
WWW
boris9831  
#5 Posted : Friday, August 4, 2017 6:37:09 PM(UTC)
boris9831

Rank: Advanced Member

Groups: Registered
Joined: 10/21/2016(UTC)
Posts: 58

Thanks: 24 times
Was thanked: 6 time(s) in 5 post(s)
keep this $25 Behringer hum buster in your toolkit. https://www.amazon.com/g...06_s00?ie=UTF8&psc=1

I used this for a church with an audio system that had hum due to cable crossings that I could not get to. It removed the hum immediately. Just hook it from the mixer out to the PC in.
Back to top
brianshupe  
#6 Posted : Saturday, August 5, 2017 4:34:31 PM(UTC)
brianshupe

Rank: Newbie

Groups: Registered
Joined: 5/3/2017(UTC)
Posts: 9
Location: Baltimore
Desmar, this solution did work for me. At least in testing. Next show is tonight.
I am using the UtrackX32 card and the software did allow me to isolate 2 outputs from the X32 as L&R.
There was still noise on the signal but I set the noise gate at -95db and it keeps the signal silent. Will see what happens during show.

DWAM, I searched and searched for XLR -> 1/8 TRS DIs but only found one possible off the shelf solution. 99% go the opposite direction.

I will update this post after tonight's show.
Back to top
WWW
mashynewie2  
#7 Posted : Sunday, August 6, 2017 10:47:02 AM(UTC)
mashynewie2

Rank: Advanced Member

Groups: Registered
Joined: 10/18/2015(UTC)
Posts: 185
Location: Newcastle NSW Australia

Thanks: 2 times
Was thanked: 44 time(s) in 33 post(s)
I use an x32 Rack connected to the PC via USB as my sound interface for vMix.

It is amazing.

You can send the main mix to vMix (as mixed in the x32) OR you can bring each input into vMix individually.

You can also send audio from vMix into the X32 for output to PA speakers.

the BEST thing about the x32 is it's auto-mix feature. IF you have multiple mics it mutes other mics when someone is speaking reducing echo and improves sound quality.

I think the x32 is the best possible sound interface (via USB) you can get.

It's a bit complicated to get settings right, but once you do, it's great.

ONLY use the USB, don't output analogue audio back to your PC.

I also have a Dante card. But you need another program to program and route audio. I just find USB to be easier.
Back to top
thanks 1 user thanked mashynewie2 for this useful post.
sinc747 on 8/8/2017(UTC)
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.179 seconds.