Rank: Newbie
Groups: Registered
Joined: 2/18/2017(UTC)
Posts: 4
Location: Missouri City, Texas
|
Good evening,
I am having trouble with getting my camcorder to show up via firewire video card on the software for streaming purposes and etc..
Any suggestions, input, advice, and etc... What has worked for you guys? If you're still using a firewire connection???
I am using a JVC GY-HD200 professional camcorder.
Thanks In Advance!
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 3/20/2014(UTC) Posts: 2,721   Location: Bordeaux, France Thanks: 243 times
Was thanked: 794 time(s) in 589 post(s)
|
Hi
please describe what is the problem...
Does vMix see your card or not?
Did you set your camera correctly according to compatible modes for 1394 output?
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 2/18/2017(UTC)
Posts: 4
Location: Missouri City, Texas
|
Good morning!
Yes vMix is not recognizing my card and my camera is set to and ready to go in the 1394 mode
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 3/20/2014(UTC) Posts: 2,721 Location: Bordeaux, France Thanks: 243 times
Was thanked: 794 time(s) in 589 post(s)
|
Are you sure this card still work?
Can you use this card with another software, like VLC, FMLE, etc... ?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 3/7/2012(UTC) Posts: 2,636 Location: Canada Thanks: 33 times
Was thanked: 506 time(s) in 475 post(s)
|
@ bwash1cor22
Which edition of Windows are you running and what driver are you using for the Firewire IEEE 1394 Host Controller?
Typically, vMix wont see the card but rather, your system needs to recognize your camera as a connected device, and then vMix will see your camera.
Ice
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 2/18/2017(UTC)
Posts: 4
Location: Missouri City, Texas
|
I am using windows 10
Not sure on the driver... where do I go to find that exact info out at it?
My computer does recognize my card, not sure about my camera
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 12/19/2013(UTC) Posts: 600  Location: Belgium Thanks: 75 times
Was thanked: 91 time(s) in 75 post(s)
|
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 3/7/2012(UTC) Posts: 2,636 Location: Canada Thanks: 33 times
Was thanked: 506 time(s) in 475 post(s)
|
@ bwash1cor22
If the camera is plugged in via Firewire, it should show up in "Device Manager" under Imaging Devices.
As DWAM asks, are you able to use (see) the camera with other software, like an NLE like Adobe Premier?
I have found that JVC cameras can be temperamental when connecting to a PC via Firewire as to "who is on first" and I can't remember which is which but I think it's the camera has to be off when connecting and then turning it on once connected, but it might be the other way around.
Keep us posted.
Ice
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 2/18/2017(UTC)
Posts: 4
Location: Missouri City, Texas
|
I am currently using the following:
1394 OHCI Compliant Host Controller
this is what is listed in my device manager under -
-IEEE 1394 Host Controllers
-1394 OHCI Compliant Host Controller
Do I need to have/use 1394 OHCI Compliant Host Controller (Legacy)???
And no, my camera is not showing up on other software...
I've tried VLC and nothing shows up...
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 3/20/2014(UTC) Posts: 2,721 Location: Bordeaux, France Thanks: 243 times
Was thanked: 794 time(s) in 589 post(s)
|
Before I try to replace the driver, I'd try another camera first. Can you find another 1394 camcorder somewhere?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 3/7/2012(UTC) Posts: 2,636 Location: Canada Thanks: 33 times
Was thanked: 506 time(s) in 475 post(s)
|
@ bwash1cor22 I know when using Windows 7, I had to use Legacy Drivers, but AFAIK, I don't require that option in Windows 10. Does it give you an option for Legacy drivers? If so, try it. Also, have you tried different Off/On scenarios? (i.e. 1. Computer off, Camera On and then turn on computer and 2. Computer On, Camera Off and then turn camera On) There is also the possibility that the Firewire port on the camera is pooched (I've heard of that particularly with JCV cameras) Many of these threads I found are dated, but it might give some insight into the issue: https://www.daniweb.com/...via-firewire-help-pleasehttp://www.videoforums.c...a-camcorder-via-firewirehttp://en.community.dell...tainment/f/217/t/6444485http://www.tomsguide.com...-camcorder-firewire.htmlYou are not the first to experience such trouble, it's just that it's older technology and not a lot of people still using it today, but it caused a lot of frustration for people back in the day. Ice
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The vMix Forums uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
