logo

Live Production Software Forums

www.vmix.com

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Weird Audio loop... Help!
Options
Go to last post Go to first unread
Previous Topic Next Topic
Runnriottt  
#1 Posted : Monday, June 22, 2015 11:51:26 PM(UTC)
Runnriottt

Rank: Member

Groups: Registered
Joined: 1/29/2015(UTC)
Posts: 10
Location: Japan

Thanks: 2 times
Was thanked: 2 time(s) in 2 post(s)
Ok. Kind of a hodge podge set up, but we are building. Here is my issue... We need to use the same feed for house sound as well as stream and recorded sound.

So, If I was to write it out in a way that shows the path of sound...

Mic - Analog board - 2tr out - small digital board with usb interface - computer - vmix - Web/Recording

I also need sound from Vmix back to house. So...

Vmix - Standard Microsoft output - Speaker Jack out - Stereo channel in to Analog board - power amp/speakers

This seems fine at lower volumes. When I push the volume at the USB interface board, weird feedback reverb loop occours.

Our main board is the mg24/14FX from Yamaha and the USB board is the XENYX 502 from Behringer.

Thoughts?
Back to top
WWW

Wanna join the discussion?! Login to your vMix Forums forum account, or Register a new forum account.
Back to top  
ovinas  
#2 Posted : Tuesday, June 23, 2015 1:13:04 AM(UTC)
ovinas

Rank: Advanced Member

Groups: Registered
Joined: 6/4/2013(UTC)
Posts: 308
Man
Location: Germany

Thanks: 1 times
Was thanked: 57 time(s) in 49 post(s)
You have to set-up a mix minus on the Yamaha board and in vMix.
Don't use the 2-Track output on the Yamaha board. You have to use an Aux output for this. Route all the channels/microphones to this aux output but NOT the input channel from vMix.
In vMix set Master Audio to none and bus A to the standard Microsoft output. Route all inputs to bus M (Stream & Recording). Route all inputs to bus A but NOT the input from the USB interface.
Back to top
WWW BLOG
thanks 1 user thanked ovinas for this useful post.
Runnriottt on 6/24/2015(UTC)
Runnriottt  
#3 Posted : Tuesday, June 23, 2015 7:51:11 PM(UTC)
Runnriottt

Rank: Member

Groups: Registered
Joined: 1/29/2015(UTC)
Posts: 10
Location: Japan

Thanks: 2 times
Was thanked: 2 time(s) in 2 post(s)
Thanks! Ill give it a shot!
Back to top
WWW
Runnriottt  
#4 Posted : Wednesday, June 24, 2015 6:09:13 AM(UTC)
Runnriottt

Rank: Member

Groups: Registered
Joined: 1/29/2015(UTC)
Posts: 10
Location: Japan

Thanks: 2 times
Was thanked: 2 time(s) in 2 post(s)
That was a bit confusing... had to go step by step and then... youtube. Its the wrapping your head around it that is confusing...

Main board out to Small board using Aux 3 and 4.

Into Channel 2 and 4 on the small board. Split the signal to Left on 2, Right on 4.

Did the above post. Set all feeds to Aux 3 and 4 on the main board.

Go into Vmix. Set all videos and inputs with sound to M and A.

Go into Vmix Settings. Set channel A to your speaker out on your computer. This was tricky. Depends on your out. This system has 5. Trial and error. Found it.

Kill Main output. Set to none.

Connect the output of the computer to the input on the main board. In my case a stereo input 17/18.
Do not send this input on the main board to Aux 3/4.

No more issue!

Thanks ovinas!
Back to top
WWW
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.089 seconds.