logo

Live Production Software Forums

www.vmix.com

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Magewell Pro Convert AES67 - Audio Only Streams via SRT
Options
Go to last post Go to first unread
Previous Topic Next Topic
BARP  
#1 Posted : Friday, October 14, 2022 5:40:31 AM(UTC)
BARP

Rank: Member

Groups: Registered
Joined: 10/14/2022(UTC)
Posts: 17
United States

Thanks: 2 times
Was thanked: 2 time(s) in 2 post(s)
Magewell just released a new audio-only streaming encoder that supports matrix style transcoding of analog, AES67, USB, NDI, and SRT audio. Unfortunately, vMix does not yet support SRT streams without a video component.

The use case for this would be in remote productions where the cameras natively support SRT and are sending directly into vMix, but the audio is being mixed or captured separately. For example announcers and commentators at a sporting event, or a concert with live music. It is not always feasible to run an XLR cable from the mixing position into a camera located on a roof or another part of the stadium/venue.

During testing, vMix can and does successfully connect to the audio-only SRT stream, but does not pass the audio because the video portion is blank.

Please add support for audio-only SRT streams.
Back to top

Wanna join the discussion?! Login to your vMix Forums forum account, or Register a new forum account.
Back to top  
PiotrSzmidt  
#2 Posted : Tuesday, April 18, 2023 6:39:29 PM(UTC)
PiotrSzmidt

Rank: Newbie

Groups: Registered
Joined: 5/8/2018(UTC)
Posts: 5
Location: Poland

Was thanked: 1 time(s) in 1 post(s)
+1 got the same problem. Talked with Magwell but unfortunetly its vMix side implementation need
Back to top
thanks 1 user thanked PiotrSzmidt for this useful post.
BARP on 4/19/2023(UTC)
mavik  
#3 Posted : Tuesday, April 18, 2023 8:15:57 PM(UTC)
mavik

Rank: Advanced Member

Groups: Registered
Joined: 4/23/2017(UTC)
Posts: 1,214
Man
Location: Germany

Thanks: 3 times
Was thanked: 168 time(s) in 150 post(s)
+1
Back to top
WWW
robert5521  
#4 Posted : Thursday, June 15, 2023 4:38:50 PM(UTC)
robert5521

Rank: Member

Groups: Registered
Joined: 6/1/2020(UTC)
Posts: 27
Spain
Location: Spain

Thanks: 1 times
Was thanked: 7 time(s) in 4 post(s)
+1
Back to top
WWW
Peter1000  
#5 Posted : Thursday, June 15, 2023 6:38:01 PM(UTC)
Peter1000

Rank: Advanced Member

Groups: Registered
Joined: 1/25/2019(UTC)
Posts: 303
Switzerland

Thanks: 17 times
Was thanked: 79 time(s) in 60 post(s)
+1
Back to top
robert5521  
#6 Posted : Thursday, June 15, 2023 8:39:39 PM(UTC)
robert5521

Rank: Member

Groups: Registered
Joined: 6/1/2020(UTC)
Posts: 27
Spain
Location: Spain

Thanks: 1 times
Was thanked: 7 time(s) in 4 post(s)
BTW, there's a new firmware for the Magewell Pro Convert Audio DX that enables sending video along the audio. That could solve the audio-only SRT Vmix limitacion

Here is the detail:
Support setting to send a default logo video for SRT TX.
Support auto rebooting periodically.
DEP (Dante Embedded Platform) supports the AES67 protocol.
Optimize the audio transmission latency of Dante protocol.
Fix the issue that the settings in Dante Controller and DDM cannot be saved after restarting the device.

Could you test it out?
Back to top
WWW
thanks 1 user thanked robert5521 for this useful post.
BARP on 6/16/2023(UTC)
BARP  
#7 Posted : Friday, June 16, 2023 11:09:23 AM(UTC)
BARP

Rank: Member

Groups: Registered
Joined: 10/14/2022(UTC)
Posts: 17
United States

Thanks: 2 times
Was thanked: 2 time(s) in 2 post(s)
I can confirm turning on the Stream -> SRT TX -> Logo setting in the Magewell Pro Convert AES67 does now allow audio to pass. The stats screen shows dropped video frames, probably due to the static logo, but the audio still passes.
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.133 seconds.