vMix Forums
»
General
»
NDI
»
SRT and NDI on same PC but 2 different networks
Rank: Newbie
Groups: Registered
Joined: 7/23/2022(UTC) Posts: 7  Location: California
|
Hey Guys,
My Vmix PC is using two ethernet adapters. The one that is on the motherboard and a 2nd one that is a USB dongle. They are on different networks. What I would like to see happen is I bring in the SRT via my public static IP network, and then NDI it over to the 2nd network. Is this possible?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 12/24/2021(UTC) Posts: 508  Location: athens Thanks: 123 times
Was thanked: 71 time(s) in 67 post(s)
|
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 7/23/2022(UTC) Posts: 7 Location: California
|
I'd like to believe you, but I've tried a lot of different ways of implementing it, and I've come up short.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 12/24/2021(UTC) Posts: 508 Location: athens Thanks: 123 times
Was thanked: 71 time(s) in 67 post(s)
|
What ways have you tried? Srt source is another one input source in vmix. Then if you want to share this input over your local network you can do it via one of 4 outputs that vmix has.
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 7/23/2022(UTC) Posts: 7 Location: California
|
The NDI doesn't broadcast out of both networks for some reason.
My PC is on two different networks at the same time. I'm trying to capture the NDI signal on a different PC which is part of one of those networks and it's not coming through.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 12/24/2021(UTC) Posts: 508 Location: athens Thanks: 123 times
Was thanked: 71 time(s) in 67 post(s)
|
Maybe i dont understand exactly what you want to do. Personally i do this. I have one pc with vmix which also have 2 network cards. One in motherboard that is connected to my local network with a network switch and a 2nd one usb ethernet card that is connected in another router that gives me internet. With this 2nd card i accept an srt input in vmix and then this input i can share to my local network with the other ethernet card from vmix output ndi
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 7/23/2022(UTC) Posts: 7 Location: California
|
And does it just work automatically? You don't have to make any specific configurations about where to tell the streams to come in or go out? You just plugged in your network cables and it all worked without any issues?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 12/24/2021(UTC) Posts: 508 Location: athens Thanks: 123 times
Was thanked: 71 time(s) in 67 post(s)
|
Yes and no. For incoming srt stream im using zerotier vpn because my internet provider doesnt allow me to open ports in router. But yes after this and once i receive srt in vmix everything else work ok without any extra settings. If you allready accept srt stream in vmix, then you should be able to send it with ndi everywhere in your local network without any extra settings
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 7/23/2022(UTC) Posts: 7 Location: California
|
okay sounds good. thanks for clearing that up for me.
|
|
|
|
|
|
vMix Forums
»
General
»
NDI
»
SRT and NDI on same PC but 2 different networks
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The vMix Forums uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
