logo

Live Production Software Forums

www.vmix.com

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Problems with Kiloview N40 Decode vmix NDI - No propper Signal decoding NDI Stream from vmix
Options
Go to last post Go to first unread
Previous Topic Next Topic
menetekel  
#1 Posted : Tuesday, July 12, 2022 9:43:12 PM(UTC)
menetekel

Rank: Newbie

Groups: Registered
Joined: 6/23/2021(UTC)
Posts: 5
Germany
Location: Jena

Thanks: 1 times
Hi,

we have two new NDI Converter N40 from Kiloview.
Encoding works fine.
but decoding does not work, when the NDI comes from vmix or vmix desktop capture.
the issue is, in the web Interface of the N40, i find the NDI source and i can decode it, but the screen i connect to the interface shows <unsupported signal> other screens show <wrong format> or <out of Range>
I tried 3 different displays, same same... (with NDI studio monitor i can see every NDI source).

When i capture the screen with NDI 5 tools screen capture, the signal shows up well.
the ndi5 tools are installed everywher, so the driver should be not the problem ?

N40 latest Firmware 2.02.0217 (BSP-2015.4)
vMix version 25.0.0.32
vmix desktop capture version 23.0.0.4

Thanks a lot,
felix
Back to top

Wanna join the discussion?! Login to your vMix Forums forum account, or Register a new forum account.
Back to top  
Maximus  
#2 Posted : Sunday, July 17, 2022 1:18:50 AM(UTC)
Maximus

Rank: Advanced Member

Groups: Registered
Joined: 10/25/2012(UTC)
Posts: 178
Location: Barbados

Thanks: 2 times
Was thanked: 24 time(s) in 24 post(s)
I have an N3 Encoder/Decoder. I had a similar problem and I changed my vMix Master Framerate t 59.94i and that solved my problem. When the Master Framerate was at 29.97p, that was the framerate being put out by the Decoder so screens won't recognize it. Try that and see if it helps.

Max
Back to top
mgrayeb  
#3 Posted : Sunday, July 17, 2022 9:49:43 PM(UTC)
mgrayeb

Rank: Advanced Member

Groups: Registered
Joined: 3/3/2018(UTC)
Posts: 184

Thanks: 86 times
Was thanked: 7 time(s) in 7 post(s)
Not sure if this is helpful but there's a Kiloview User Group on Facebook where perhaps someone may be able to help if the ideas shared here don't solve the issue for you. I believe some Kiloview support team members are active participants in that group as well.
Back to top
menetekel  
#4 Posted : Friday, July 22, 2022 12:12:01 AM(UTC)
menetekel

Rank: Newbie

Groups: Registered
Joined: 6/23/2021(UTC)
Posts: 5
Germany
Location: Jena

Thanks: 1 times
Hi,

I got an answer from Kiloview-support:

---
At present, we have been using VMix (version: 23.0.0.67) for testing in our office, and the test results are all working properly.
So we suspect that there may be a relationship with the version of vmix, we have not tested it with VMIX 25.0.0.32 and N40.
We'll figure out a way to use that version for testing. If there is indeed a problem, we will feed it back to our R&D engineers for optimization.
---

Iy will try with an older vMix next week...
Back to top
mavik  
#5 Posted : Tuesday, July 26, 2022 6:51:12 PM(UTC)
mavik

Rank: Advanced Member

Groups: Registered
Joined: 4/23/2017(UTC)
Posts: 1,230
Man
Location: Germany

Thanks: 3 times
Was thanked: 168 time(s) in 150 post(s)
Try updating the firmware to the latest. I only have the S2 and P2 at hand for testing and did a N20 review and test here

Maybe you can grab some information from it.
Back to top
WWW
Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.187 seconds.