vMix Forums
»
General
»
Hardware Compatibility
»
Multiple HDMI cams to single Thunderbolt output
Rank: Advanced Member
Groups: Registered
Joined: 1/29/2017(UTC) Posts: 140   Location: Squamish Thanks: 54 times
Was thanked: 4 time(s) in 3 post(s)
|
Does anyone know of a method to connect 2 (or maybe more) HDMI cameras and lead them to a single Thunderbolt output for ingesting video into a PC laptop which has just one TB3 port?
Also will vMix recognize the 2 cameras separately?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 8/2/2015(UTC) Posts: 364  Location: Sydney Thanks: 283 times
Was thanked: 76 time(s) in 62 post(s)
|
Use external PCIe Thunderbolt case like the Akitio Thunderbolt2 Expansion box or new models with Thunderbolt3. You can use the Apple THunderbolt3 to Thunderbolt2 adapters which are cheaper then the Windows adapters. Akitio Thunder2 PCIe BoxIt allows you to add a external cards like Blackmagic. I use one with the Blackmagic Decklink Duo2 Quad SDI input card. You would be looking at about $1000-1500 total depending on which card you use. For HDMI there are few different manufactures but the guys could answer that quickly.
|
 1 user thanked corporatejames for this useful post.
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 1/29/2017(UTC) Posts: 140 Location: Squamish Thanks: 54 times
Was thanked: 4 time(s) in 3 post(s)
|
So is each camera identified as a separate input by vMix?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 10/13/2012(UTC) Posts: 1,161 Location: Melbourne Thanks: 220 times
Was thanked: 199 time(s) in 181 post(s)
|
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 1/29/2017(UTC) Posts: 140 Location: Squamish Thanks: 54 times
Was thanked: 4 time(s) in 3 post(s)
|
I only ask because my current setup (Lenovo W530 laptop) has 3 USB 3.0 ports which I gather are on the same bus - and when I connect 2 cameras to them (via 2 separate Hdmi to USB 3 adaptors) only one camera is recognized by vMix. To connect the 2nd cam I have to connect it via the Hdmi-USB3 device through an ExpressCard USB 3.0 adapter.
The system I am looking to get shortly has only One Thunderbolt 3 port and am wondering if the same thing would happen if multiple cams are connected to a single Hdmi-to-TB device (?)
(Of course it does have separate USB 3.0 ports but that is for adding yet another extra cam, so lets ignore that for this discussion).
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 8/2/2015(UTC) Posts: 364 Location: Sydney Thanks: 283 times
Was thanked: 76 time(s) in 62 post(s)
|
Not all USB devices allow multiple devices to be connected at the same time and then be seen as separate devices due to drivers they
have, plus you are limited on the amount of USB due the bandwidth. If the laptop that has TB3 or even TB2 port you will be happy and be able to use more professional hardware just need to get over price hurdle
then should be all good.
|
1 user thanked corporatejames for this useful post.
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 1/29/2017(UTC) Posts: 140 Location: Squamish Thanks: 54 times
Was thanked: 4 time(s) in 3 post(s)
|
So I took your advice and have decided on the Akitio TB3 box with the Blackmagic Intensity Pro 4K pcie card which will allow 2 hdmi cams to be connected to the laptop via TB3.
Then another hdmi connection via the USB 3 port and yet another hdmi cam via an hdmi expresscard adaptor - making 4 cams in total.
I'm not sure if I can daisy-chain another TB3 device to the Akitio box (since it has 2 TB3 ports) but that's for another day.
Thanks for pointing me in the right direction.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 10/7/2015(UTC)
Posts: 635
Location: California
Thanks: 122 times
Was thanked: 123 time(s) in 115 post(s)
|
pesi wrote:So I took your advice and have decided on the Akitio TB3 box with the Blackmagic Intensity Pro 4K pcie card which will allow 2 hdmi cams to be connected to the laptop via TB3.
Then another hdmi connection via the USB 3 port and yet another hdmi cam via an hdmi expresscard adaptor - making 4 cams in total. The Blackmagic Intensity Pro 4K only has one HDMI input. https://www.blackmagicdesign.com...intensitypro4k/techspecsAlso, I didn't think a laptop with Thunderbolt 3 would have a Expresscard slot. Which make/model is that? Think about getting a 4 input HDMI capture device (Magewell, Blackmagic, etc.) to use with your Akitio box.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 1/29/2017(UTC) Posts: 140 Location: Squamish Thanks: 54 times
Was thanked: 4 time(s) in 3 post(s)
|
You're right - the second hdmi port is an output !
The Lenovo Thinkpad P51 has a TB3 port (unfortunately just one) in addition to USB 3.0 ports as well as an ExpressCard slot - which is why I am tending towards it.
I did find a 4-hdmmi-input card (Magewell Pro capture quad) but Ouch! The price - $900 USD!!!
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Joined: 8/29/2015(UTC)
Posts: 135
Location: Seattle Wa
Thanks: 16 times
Was thanked: 14 time(s) in 13 post(s)
|
you can use hdmi to sdi adapters also, they work and there about $39 for the blackmajic ones. then pickup a used aja kona 3g on ebay and that will give you 3 1080p 60 sources. or a decklink duo 2 . also i would go with startech thunderbolt 3 to 2 adapter, i have read it is better, i have them, they work great.
|
1 user thanked hellokitty for this useful post.
|
|
|
|
vMix Forums
»
General
»
Hardware Compatibility
»
Multiple HDMI cams to single Thunderbolt output
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The vMix Forums uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
